Get matched with top concrete resurfacing pros in Mississippi State, MS

The easiest way to handle extra-wet cement is to pour it, let it harden, and then recycle it using one of the methods above. You can also crush it down and sell it for base materials, although this can be pretty time-consuming. Your best bet is to start with less concrete than you need and make more as you go to avoid this problem.

The method used to repair cracks in your concrete driveway will depend on the extent of the damage, but the most common method for small cracks is to use a driveway resurfacing compound. This solution is either cementitious or made of polyurethane, and it will seal the crack and make your driveway appear undamaged. 

For more severe cracks, you will likely need to hire a professional driveway repair service. They can use mudjacking, epoxy injections, partial driveway replacements, or a combination of these to fix more serious cracks in your concrete driveway and to prevent recurring issues.

Concrete pools are very durable but can crack if not properly maintained. The most significant risk is winter weather and low temperatures when water can seep into crevices and freeze. To avoid damage, use the proper winterization chemicals, and don’t completely drain your pool. Concrete pool repairs cost around $75 per linear foot for small cracks.

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.