Top-rated sandblasting pros.

Best sandblasting pros near Inverness, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Inverness, MS?

Select your specific project to find the pro for you.

Top-Rated Sandblasting pros in Inverness - Updated Nov 2026

Avatar for Luke's Painting Company
Luke's Painting Company
4.4(
40
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Inverness, MS and surrounding areas

In business since 2017

Free estimates

Credit card accepted

"Luke is extremely professional and the service that he provided was timely and well done. He communicates well and we always knew when our work was going to start and finish. Afterwards he communicated with us concerning the job and whether or not we had any concerns or were pleased with the job. If we had had some issues he would have immediately come to fix them but we were very satisfied with the job. I would recommend Luke’s service to anybody."
After.. what an amazing difference!
After picture of the beautiful entryway
after picture of the fence
after.. beautiful color!
Exterior Painting in Sellers, SC

+76

Recommended by93%of homeowners
Sandblasting Services FAQs, answered by experts

Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

Sandblasting is useful when you need to strip material off a hard surface. Common reasons to sandblast are to remove paint, rust, or get a surface ready for a new material. You aren’t limited to surfaces like walls either—you can sandblast rusted tools, bicycle frames, cement, bricks, and many others. If what you’re sandblasting is still structurally sound, sandblasting can be a fast and inexpensive way to revive the original material. 

Because these two systems have different applications, there is no definitive answer to which is better. When working with sturdy materials, sandblasting is cheaper and faster, but more delicate projects require soda blasting. Before choosing either option, consider your specific needs, particularly your ultimate goal (cleaning, removing rust, prepping for painting, etc.), the material, and your budget.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

The Inverness, MS homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.