Top-rated insulation pros.

Get matched with top insulation pros in Hillsboro, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your insulation service project in Hillsboro, MS?

Select your specific project to find the pro for you.

Find Insulation pros in Hillsboro

Avatar for Pro Seal Spray Foam, LLC
Pro Seal Spray Foam, LLC
5.0(
3
)
Spray Foam Insulation - InstallBatt, Rolled or Reflective Insulation - Install or Upgrade

Serving Hillsboro, MS and surrounding areas

Approved

In business since 2017

Free estimates

Credit card accepted

"Performed insulation work on our home. Vacuumed out the 25 year old blown in insulation on day one, then sprayed in foam for the whole roof to include the attached garage, and cleaned up afterwards. When there was confusion of the work they performed (my fault) Lee called me up to see if we were satisfied and was willing to do more to make me happy, but this was not necessary after he explained the work performed and I agreed that all was good. They came in on the week promised, delivered what was expected, and at a very competitive price. Also for veterans, they do give a veterans discount, so don't forget to ask."
Response time2 days
31 neighbors recently requested a quote
Green Leaf Insulation LLC
4.9(
91
)
Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or Upgrade

Serving Hillsboro, MS and surrounding areas

In business since 2011

Free estimates

Small jobs welcome

"The service guy was very polite and he also explain his work he was very thorough inside the house outside the house and under the house and he wasnâ t in any hurry. I called that dedication to the job."
Insulation
Insulation
Response time4 hrs
Response rate91%
Recommended by100%of homeowners
Avatar for Queen City Insulation Co Inc
Queen City Insulation Co Inc
5.0(
4
)
Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or UpgradeInjection Insulation - Install+2 more

Serving Hillsboro, MS and surrounding areas

"Greg  came out and they would do during the installation such as puttint up dry wall so they have something to attach the door opener to.  They used the dry wall that I had which was the way I wanted it.
When Jim came out to install the garage door he called me when he was leaving Meridian and told me approximately when he would arrive.  He was very punctual as was Greg.  Jim installed the door just as was discussed.  It took him most of the day as this was an odd size door.  Jim was very plesant and knowledgable about the products and told me what he was doing and why he was doing things the way he was doing them.  I have a tendency to ask a lot of questions about what is going on and he answered every question I had.
When he was finished he explained the operation of the door and how to program the outside key lock as well,  He told me if I had a questions in the future do not hesitate to call.  Jim was very thorough about making sure he picked up any mess he has made. 
I would not hesitate to use them again in the future.  In fact I am going to talk to them about the insullation in my home late on.

"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+3

Recommended by100%of homeowners
Showing 1-10 of 26
Insulation questions, answered by experts

Spray foam insulation doesn’t do well around heat sources. Therefore, You can use spray foam insulation to seal around HVAC boots that penetrate through the drywalls or around where wrapped ducts connect to the boots, but we don’t recommend using spray foam insulation to encapsulate your air ducts. Spray foam insulation on air ducts is also less effective compared to duct wraps.

Water freezes at 32 degrees Fahrenheit, but the actual temperature that can cause frozen pipes can vary. Generally, it takes 12 hours for pipes to freeze at 32 degrees Fahrenheit.

Uninsulated pipes can freeze if it’s 20 degrees Fahrenheit or colder for over three hours. If your pipes are insulated, it can take six hours or longer for pipes to freeze. Note that some pipe types freeze more often than PEX pipes. Copper pipes freeze more often because the copper conducts energy and loses heat quickly.

Minimal, mainly occasional checks for damage or mold in extreme conditions.

Spray foam insulation can last between 80 and 100 years, depending on the type. Closed-cell spray foam is more durable, while open-cell foam is more susceptible to moisture damage and deterioration. It's important to consult a professional installer to understand which type of foam will be used and its specific longevity. Additionally, be aware that some spray foams can damage plastic piping, so if you have PVC or CPVC pipes, discuss this with your installer.

On average, insulating an attic costs about $2,500, with a typical range of $1,500 to $3,500. The final price often depends on the attic's size, with costs generally falling between $1 to $3 per square foot. For example, insulating a 1,800-square-foot attic would likely cost between $1,800 and $5,400.

If the project involves removing old insulation, this can add an average of $900 to the total cost, bringing a full removal and reinsulation project to around $3,000.

Several factors influence the overall cost:

  • Insulation Type: Prices per square foot vary significantly by material.

  • Reflective: $0.50–$1.50

  • Blown-in: $1–$4

  • Batt: $2–$4

  • Loose-fill: $2–$5

  • Spray foam: $2–$5

  • Structural insulated panels (SIPs): $4–$7

  • Project Complexity: Factors like sealing air leaks, poor attic accessibility, and required inspections can add to the cost.

  • Removal Issues: The discovery of mold, asbestos, or pests during the removal of old insulation can substantially increase the price.

The Hillsboro, MS homeowners’ guide to insulation services

From average costs to expert advice, get all the answers you need to get your job done.