Get matched with top exterior painters in Friars Point, MS

If you want your paint to have a smooth finish, the technique you use is very important. Keep your brush at a 90-degree angle while applying the paint and feather as you go. Between coats, sand the wall lightly using a very high grit sand sponge of at least 220 grit.

There is no one correct order for painting a room, as it largely depends on personal preference and skill level. However, for non-professional painters, we recommend the following order: ceiling, walls, doors, windows, trim. This is because painting trim, windows, and doors can be more time-consuming and meticulous, and it's best to save them for last when you’ve already gained some confidence from painting the larger surfaces.

Stucco will dry in two to three days, but you should wait one to two months to allow it to cure fully before you paint it. The curing process is slow, but leaving the material exposed to air and natural moisture will help it reach its maximum strength. If you live in a hot, arid climate, wait a month before painting. Wait two months before painting if you live in a more moderate or wet climate.

You technically can paint wires in a basement ceiling, but there are several important safety and code considerations. It's safe to paint non-metallic sheathed cable as long as the labeling remains visible. You can also paint low-voltage wires and conduit and junction boxes to help them blend into your basement. 

However, you should not paint damaged or deteriorated wiring is a fire hazard because it poses a fire hazard. The same goes for painting over high-heat wires that connect to heat-generating appliances or systems. Be sure to avoid painting multiple coats onto any wires, as that traps heat and poses fire risks.