Get matched with top garage cleaning pros in Drew, MS

Your epoxy garage floors will last two to 10 years, depending on foot traffic and maintenance. Clean your floor regularly with a mop or a power washer using a diluted ammonia or degreaser solution. Use five ounces of ammonia per gallon of water or a half-cup of degreaser per gallon of water.

Also, sweep regularly, clean up any spills right away, and install mats in places where you expect the most foot traffic.

Christmas lights and decorations are prone to heat and humidity damage, so keep this in mind if you store them in the garage. Put the lights in plastic bins with tight-fitting lids to keep moisture out to keep them safe until next year. 

It’s important to weigh the advantages and disadvantages of epoxy garage floor coatings. Consider the following pros and cons of this garage addition, including the following:

Pros:

• Increased visibility

• Durability

• Long lifespan

• Low maintenance

• Versatile appearance

• More sustainable

Cons:

• Strong odor when applying

• Difficult to remove

• Can be slippery

• Possible bubbles and blisters

• Temperature sensitive while curing

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.