Get matched with top garage cleaning pros in Marks, MS

If your cement garage floor is sinking and cracking, your first step should be to call a local structural engineer to assess the problem. They can determine if it’s a minor amount of sinking related to normal settlement or if the issue is structural in nature. If you do have structural damage, the engineer or a foundation repair company that you hire will come up with a plan to fix the issue, which often consists of mudjacking for less severe issues or underpinning for more extensive problems.

You can expect your seal to last anywhere from 1 to 5 years. Several factors affect this—material, frequency of use, and the weather. For example, seals made from high-quality rubber are built to withstand the elements and can go the distance with a little TLC. If your door sees a lot of action or faces extreme heat or cold, the seal could wear out more quickly. Regular maintenance—like cleaning and lubrication—can make your seal last longer. And while it’s rare, a professionally installed seal on a smooth floor can potentially last up to 10 years.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Garage door sensors should be installed on each side of the door, typically six inches off of the ground. The sensors communicate through an infrared beam, so they need to face each other directly for the system to work properly. Make sure they’re level and aligned, and keep the area around them clear. If they’re too high or out of alignment, your garage door won’t function properly.