Get matched with top driveway gate pros in Patton, MO

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Is your wrought iron gate really rusty or in need of major repair work? Replacing it with a gate with built-in privacy screening may be easier and, in some cases, more economical. Professional fence or gate repair costs average $100 to $400, and you may be able to get a new gate for the same price.

A Trex gate costs $750 plus another $200 for the hardware pack necessary for installation. By contrast, Trex fencing ranges in price from $22 to $38 per linear foot, so you may pay a lot or a little depending on just how much space you need to enclose in your yard. 

The obvious disadvantage of an automatic gate is that it runs on electricity. If the power goes out, it won’t open or close unless there’s a manual override. Many homeowners will need a backup generator so they don’t get stuck on either side of the gate, particularly when looking to park a vehicle. Automatic gates are also much more complicated than manual gates, with tech-heavy components that make them more expensive to repair.