Get matched with top sonic cleaning pros in Norwood, MO

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

You may become so frustrated with the look of moss on your roof that you contemplate whether to clean or replace your roof. Fortunately, you don’t have to go as far as replacing it. After cleaning the moss, you can use a chemical solution to keep it away. For further protection, trim branches that overhang the roof, as fallen seed pods and leaves on the roof allow moisture to collect, encouraging moss growth. Consider adding zinc-coated flashing to the roof, too. As rain washes across the zinc, it leaves zinc particles behind that inhibit moss growth.

Ideally, you will tackle removing algae from your roof during spring or summer when the weather is drier and warmer. Because algae tends to grow during the colder and wetter months, you want to tackle this project before the temperature drops to hopefully keep it from coming back at all.

You should not clean roof shingles if the roof has damage like missing shingles or low spots where water may accumulate. You should focus on repairing the roof before any cleaning process occurs. If you notice roof damage as you’re climbing on the roof to clean it, stop immediately. Call a roofing pro to make repairs. Cleaning a roof that has damage could lead to pooling water or water damage to the roof decking. The roof cleaning process removes mold and mildew, making the roof look better. It is not going to fix physical damage, though.