Top-rated deck staining pros.

Get matched with top deck staining pros in Moberly, MO

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Moberly, MO?

Select your specific project to find the pro for you.

Find Deck staining pros in Moberly

Avatar for RNC Painting LLC
RNC Painting LLC
4.6(
69
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Moberly, MO and surrounding areas

In business since 2010

Free estimates

Credit card accepted

"RNC was very responsive to my project. We had an upfront price within 24 hours and agreed to get the project started. The communication between us was on point. I knew what was happening every step of the way. The project was completed in the time frame specified. Robert and Carla were very detail oriented, down to the position of the screws on the cover plate going the same direction as the switch. We have hired them again to paint the bathroom."
scraping ceilings
Priming ceilings
Additional Photos
Additional Photos
Additional Photos

+10

Recommended by89%of homeowners
Showing 1-10 of 41
Deck Staining questions, answered by experts

While the answer varies based on weather, 10 a.m. is a good time to start painting. The dew will have dried, meaning there’s no moisture on the house, and the temperature will likely be moderate and the sunlight less direct. Starting mid-morning should also give you enough daylight and pleasant weather to work on the job for several hours.

A concrete overlay is often the most cost-effective way to resurface a pool deck. To do this, you’ll need to pour a thin layer of concrete over the existing pool deck, which you can customize by stamping or painting. A stamped concrete overlay provides additional traction on a pool deck that can help minimize the risk of people slipping and falling.

It’s necessary for paint to completely dry before exposure to rain, and that drying time varies by the type of paint used. Oil-based paint takes 6 to 8 hours to dry on average, meaning that’s the minimum time needed between the last brush stroke and the first raindrop. Latex paint dries faster at around 1 hour, and acrylic paint is even quicker, usually drying in about 30 minutes. If rain is in the forecast, check the paint manufacturer's details before laying on a new coat. 

Avoid using cleaning products that are abrasive or contain bleach or acidic components on composite decking to avoid discoloration. Early-generation Trex decking isn’t designed to handle pressure washer cleaning—and if you use them on second-generation boards, always use a low setting to avoid the risk of damage that can risk voiding your warranty.

Yes, you can and should paint or stain pressure-treated wood to help prevent the boards from cracking. However, you must wait for the wood to dry out completely before applying any finish. Freshly treated wood can take weeks or even months to dry; a common recommendation is to wait three to six months. To check if the wood is ready, perform a simple water test: drip some water onto the surface. If the water beads up, the wood is still too wet and needs more time to dry. If the wood absorbs the water, it is dry enough to be painted or stained. You can proceed with building your deck or fence while the wood is still wet, but you will need to wait to apply the paint or stain.

The Moberly, MO homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.