Get matched with top epoxy flooring pros in Lewistown, MO

When you install laminate flooring, you have to install spacers (also called expansion gaps) along the edges. This space along the edges gives the flooring the room it needs to naturally expand and contract. When you don't have an expansion gap, you can end up with damaged or warped planks. This can lead to uneven flooring, which is unsightly and can cause a trip hazard.

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.

There are a few different types of finishes to choose from for the final step of the project. 

Water-based polyurethane sealants emit fewer odors and fumes but dry quickly, which can pose a challenge when trying to get a smooth coat. Oil-based polyurethane sealants let out more odors and fumes into the air (it’s especially important to wear a respirator if you choose this type), but they take longer to dry, which can be more forgiving during the finishing step. 

Some may prefer wood oil to polyurethane because rather than creating a layer, it becomes part of the wood. Wood oil takes longer to dry, and is less resistant to wear and tear; however, it creates a natural-looking result by enhancing the grain of the wood. 

You can use underfloor heating with most kinds of flooring. However, particularly thick carpet will create problems, since it will absorb a lot of the heat and make it difficult to feel. Also, there are some concerns that underfloor heating can dry out natural wood over time, so if you have wood flooring, get an expert opinion on whether radiant heating is appropriate.