Get matched with top mailbox repairers in Aurora, MO

Yes, you can repair cat scratches on leather furniture. A quick fix that won’t repair roughness is a leather recoloring balm that helps scratches blend in. Otherwise, use the following process.

1. Clean the area and trim loose fibers.

2. Rub leather binding glue all over the affected area.

3. Sand the area down with fine-grit sandpaper and clean off any residue.

4. Fill holes, scratches, and gouges with leather putty from a leather repair kit.

5. Sand the area down again and clean off any residue.

6. Apply leather colorant in several layers.

7. Seal the color in with a leather sealant and finish.

Furniture repair costs around $200 on average, and most project costs fall between $100 and $500. The price you can expect to pay will depend on the type of furniture you’re repairing, the extent of the damage, and the size and age of the piece. Reupholstering and couch frame repair are the most expensive, sometimes costing $1,000, while fixes like repairing a scratch or replacing a spring in a couch or armchair will usually cost under $100. Older furniture requires more care and will typically cost more to repair.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

Yes, using samples and expertise to find the best materials.