Get matched with top gate repair pros in Springfield, MN

Gates are often stuck halfway due to physical blockages or damage to the rollers, wheels, or tracks the gate runs on. Check to make sure there are no obstructions before considering that the motor might be burned out or malfunctioning somehow. Hopefully, the issue is simple, and you can remove it with a broom or your hands, but if your gate is stuck and there's no obvious reason why, you should call a pro to diagnose the issue.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

You don’t need a permit for an automatic gate in most cities because it isn’t a structural change to your home, but you need to check. A pro can help you with this and since we don’t recommend installing an automatic gate yourself, you should already be in contact with one, making this a frictionless question. Outside of permit requirements, you need to consider your homeowners association (HOA), as some are against gated homes.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate.