Get matched with top welders in Otsego, MN

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: How do various elements influence the cost of assembling a unit?

• <div><p>Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: What questions should I ask a welder before hiring?

• <div><p>There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:</p><ul><li><p>Are you licensed and certified?</p></li><li><p>How long have you been in the welding business?</p></li><li><p>Do you commonly do the type of welding I need?</p></li><li><p>Do you offer any kind of warranty for your work?</p></li><li><p>Do you charge by the hour or by the project?</p></li><li><p>How long do you expect my welding project to take?</p></li><li><p>What steps do you take to minimize errors in your work?</p></li></ul><p></p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Otsego, MN?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Otsego, MN

*The Angi rating for Welding companies in Otsego, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Otsego, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on September 18, 2025

Reviewed in September 2025
Done Right Mobile Welding showed up on time. Mr. Miller was very professional. He quoted the job. He was hired. He completed my work and he did OUTSTANDING work. His prices were very fair. I will recommend Done Right Mobile Welding and will hire again.
Done Right Mobile Welding
Request a quote
Reviewed in September 2024
As a roofing contractor I need to work with companies that I can trust. S & M exteriors is exactly that, a company I trust. They do a fantastic job and are very responsive when I need their services.
S&M Exteriors Inc
Request a quote
Reviewed in August 2023
I had Preferred Contracting & Restoration come out to my home. They did a free estimate and were great, professional and knowledgeable about roofing and insurance claims. The technician was funny and very kind! I will for sure hire them for future projects!
Preferred Contracting & Restoration
Request a quote
Reviewed in April 2023
We were in need of a gas pipe repair & they responded quickly, offered several options & were efficient in the work done. I would recommend using them again
Modern Plumbing and Heating
Request a quote
Reviewed in April 2022
Knowledgeable, professional, and outstanding craftsmanship. Hire them, you won't be disappointed.
Creative Cabinetry
Request a quote
Reviewed in April 2021
He has always accommodated my welding needs even on an emergency basis. He built a utility trailer for my lawn care business and I was very pleased with the results.
RCool Welding
Request a quote
Reviewed in September 2018
Job was done quickly and professionally. Will definitely use Weld and Son's again
Weld & Sons Plumbing
Request a quote

Find Welders in Otsego

Thell welding & Fabrication

5.0(

)

Serving Otsego, MN and surrounding areas

In business since 2024

Free estimates

Warranties offered

"Excellent attention to detail. One job turned into multiple after seeing the quality of work. Very knowledgeable/helpfull throughout the process."

Recommended by100%of homeowners

Serving Otsego, MN and surrounding areas

In business since 2016

Free estimates

Emergency services offered

"They were great and looks good. They work and beyond. I have no problem recommending them and will use their service again. Everybody uses main Offroad will be satisfied."

Recommended by100%of homeowners

Request Quote

Big Boy Manufacturing

5.0(

)

Serving Otsego, MN and surrounding areas

"Pretty solid work. Just some small projects I had done that still hold up nicely."

Recommended by100%of homeowners

Serving Otsego, MN and surrounding areas

In business since 2022

Free estimates

Offers commercial services

"Did our 316 stainless piping for Agri Systems. He was hard to get a hold of and had some scheduling conflicts but exceeded our deadlines and did great work. Seemed very knowledgeable. Will be doing expansion work for us in the future."

Response time6 days

Recommended by100%of homeowners

Request Quote

Crack Welding

New to Angi

Serving Otsego, MN and surrounding areas

In business since 2021

Crack Welding LLC\n\nI've Been Welding/Fabricating Since 2016.\nSCTCC Certified\nMild Steel, Stainless, and Aluminum\n\nRepairs, Projects, Decorations, etc... any idea/project you have I can make/fix for you.\n\nMessage or Call For Inquiries\n763-482-2412

Serving Otsego, MN and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Richie and his crew is experienced , knowledgeable, dependable, conscientious, informative and sticks to his schedule. I would hire again."

Recommended by100%of homeowners

Request Quote

J & J's Welding and Fabrication

New to Angi

Serving Otsego, MN and surrounding areas

In business since 2021

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We strongly believe in giving our absolute best in all of our projects no matter how big or small. We are experts in our trade and will always keep you educated on your particular task or project. We look forward to earning your business!

Request Quote

Wilcoxs general repair

5.0(

)

Serving Otsego, MN and surrounding areas

"Hired Wilcox’s General Repair as a subcontractor for this project and the work was phenomenal!"

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Otsego, MN and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"They were good. They were pretty fast and came on time. My overall experience with them has been good."

Recommended by60%of homeowners

Request Quote

Grunwald and Sons LLC

New to Angi

Serving Otsego, MN and surrounding areas

In business since 2020

Free estimates

Credit card accepted

We are a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 4 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today

Request Quote

Showing 1-10 of 11

Welding questions, answered by experts

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

Are you licensed and certified?
How long have you been in the welding business?
Do you commonly do the type of welding I need?
Do you offer any kind of warranty for your work?
Do you charge by the hour or by the project?
How long do you expect my welding project to take?
What steps do you take to minimize errors in your work?

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The Otsego, MN homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Mitchell Grant
•
Apr 16, 2026Apr 16, 2026
How Much Does It Cost to Install a 240V Outlet in Minneapolis, MN? [2026 Data]
The cost to install a 240-volt outlet in Minneapolis, MN varies depending on the amperage and the home’s current wiring conditions. Use this guide to budget for your next project.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Paige Bennett
•
May 2, 2026May 2, 2026
7 Types of Farm Fencing and How to Choose the Best One
There are a lot of different types of farm fencing. Find the one that’s right for your property with our handy guide.