Get matched with top locksmiths in Nevis, MN

Most door knobs can be removed with a Phillips or flathead screwdriver. If you don’t have either of those available, a paper clip or small pin can sometimes work, but the extra effort may not be worth a quick trip to the hardware store.

Several types of deadbolts are available, including single-cylinder, double-cylinder, rim, smart, and electronic deadbolt locks. The most common type found in U.S. homes is the single-cylinder deadbolt, which uses a key on the exterior and a thumb turn on the interior. A double-cylinder deadbolt features two locking mechanisms and requires a key to be operated from both the inside and the outside.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.