Get matched with top locksmiths in Nashwauk, MN

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.

Begin by checking the power source, typically a battery or wired connection. Ensure the battery is installed correctly, has sufficient charge, and isn't corroded. If it's a wired lock, examine the electrical connections to confirm they are secure and free from damage. Additionally, inspect the lock's programming or settings. Confirm that user codes or access credentials are programmed correctly and that any remote control devices are paired and functional.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.