Best ceramic tile pros near Baudette, MN

The lifespan of bathroom tile can be 50 years or more, depending on proper installation and regular maintenance. A well-done tile job, whether it's a new installation or a retiling project, can last for many decades. To lengthen the life of your tile, it's best to have it installed by a professional and to perform regular maintenance. This includes routine cleaning, resealing, and regrouting as needed. With proper care, you can expect your tile to last 10 years or more before needing major repairs or retiling, especially in high-traffic areas where tiles can wear out more quickly.

You can attach tiles to a wall using thin-set mortar. You’ll also need a notched trowel to create grooves within the adhesive so it flattens completely when pressed in and securely holds the wall tiles. Finally, you’ll need grout to smooth the gaps between the tiles and, ideally, a grout sealer to prevent mold. While it sounds simple enough, proper planning and execution are crucial, so carefully review the steps in this guide or hire a pro tile installer to complete this project.

The cost to install porcelain tile is about $1,930 on average. Porcelain tile prices range from $880 to $3,000 or more. The average cost tends to be higher than ceramic tile because porcelain tile is very durable. Porcelain tile rating also factors into the material cost. Tile ratings are as follows:

• Grade 0: Walls only

• Grade 1: Walls and light traffic floors

• Grade 2: Rooms with light traffic, but not kitchens or hallways

• Grade 3: Kitchens, hallways, and entryways

• Grade 4: Any area, interior or exterior

• Grade 5: Highest durability good for any area, interior or exterior

On average, tiling a bathroom involves about 12 hours of labor, usually spread over two to three days to accommodate prep work and curing times. A professional tiler can often complete the installation in 6 to 8 hours, whereas a DIYer might take 10 to 16 hours. The total project time is influenced by factors like the bathroom layout, tile type, and necessary prep work, such as removing old tile. The process includes specific timelines for different areas; for example, tiling a floor takes about six hours, while a shower area can take six to ten hours. It is essential to allow for adequate curing time—typically 24 hours each—for the mortar, grout, and caulk, which is why the project extends over several days.