Get matched with top masons in Watersmeet, MI

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Yes, brick can breathe through limewash. Limewash is a breathable coating made from natural lime and water, allowing moisture to pass through while providing a protective layer. Unlike synthetic paints or sealants, which can trap moisture within the brick and lead to issues like mold, limewash allows the brick to maintain its natural breathability. This characteristic makes limewash an ideal choice for historic structures where preserving the integrity of the brick is essential.

No, you don’t need to soak the brick before cutting it by hand. In fact, cutting a wet brick can make it harder to see your score lines and may cause the chisel to slip. Soaking is sometimes used with power tools to reduce dust, but for hand-cutting, it’s best to work with dry bricks for better control and visibility.

Unfortunately, there are many disadvantages to stone houses. They are slow to build and the materials are pricey, both of which balloon the total cost. Stone walls require a more robust foundation, which costs more to install. Running plumbing, electrical, and HVAC through a stone house is much more difficult too, so homeowners need to seriously consider if the aesthetic benefit is worth the cost of building with stone. One of the questions to ask a masonry contractor is if a similar aesthetic can be achieved with another material.