Best garage cleaning pros near Mendon, MI

Wood, steel, fiberglass, and aluminum are among the top building materials for a garage. Wood is highly customizable, naturally insulative, and durable in mild climates but can be expensive. Steel is lightweight, low-maintenance, and cost-effective, but it’s susceptible to rust. Fiberglass is low-maintenance and doesn’t shrink or expand in changing temperatures, but it can become brittle and crack from prolonged high winds and sun exposure.

Unlike steel, aluminum isn’t susceptible to rust and is low-maintenance, but its ultra-light weight makes it less durable than some materials, and it’s susceptible to saltwater damage, making it a poor choice for coastal homes.

As with anything you buy, be wary of prices that seem too good to be true. Some low-cost flooring products can contain chemicals that release harmful VOCs (volatile organic compounds) in the form of fumes that can be inhaled or dust that can cause skin conditions.

Even good-quality products can be dangerous for DIY-ers who don’t take proper precautions. Always carefully read manufacturer instructions and wear the recommended protective gear when working with paints and other chemicals. You can also hire a local garage flooring pro with the experience and equipment needed to perform the installation safely with no lingering fumes or debris.

If you have a garage heater that is 1,500 watts or more, it will need its own breaker. As a good rule of thumb, no appliance should exceed 1,500 watts per outlet for best outcomes. Consult a local garage heating service to determine the power needs for your outdoor or indoor space.

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.