Get matched with top stucco pros in Hancock, MI

The decision to repair or replace stucco depends on the extent of the damage. For minor issues like small cracks, holes, dirt, stains, or discoloration, a repair is typically sufficient and more cost-effective. These issues can often be resolved with a simple repair, a deep clean, and possibly a new coat of paint. However, for more significant problems such as large cracks, peeling, mold, algae, or structural water damage, a replacement might be necessary. In these cases, it is best to call a professional stucco contractor for an inspection. An expert can assess the severity of the damage, determine if there are deeper issues, and advise whether a repair is adequate or if replacing a section or an entire wall is the more cost-effective, long-term solution.

It typically takes around 30 to 60 minutes for a window pro to replace one window in standard siding types, but a window in stucco will likely take a bit longer because of the density of materials. Custom architectural windows usually require a longer replacement process because of the additional fitting and securing required.

The average cost to repair stucco is about $1,600, with projects ranging from $250 for minor fixes to $6,700 for extensive work. The price is often calculated per square foot, typically costing between $60 and $120. Some professionals may charge an hourly rate of $40 to $50. The final cost depends on the extent of the damage, the type of stucco, your home's location, and whether there is underlying damage that also needs to be addressed.

Costs for specific repairs vary:

• Cracks: $8–$20 per square foot

• Holes: $250–$450 per hole

• Water damage: $30–$50 per square foot

• Chimney repair: $60–$120 per square foot

• Recoating: $4–$5 per square foot

While you may be able to patch small cracks yourself, it is recommended to call a professional for major repairs to ensure the job is done correctly.

You can use small bits that are up to 3/8 inch in diameter, or larger bits that are 1/2 inch or more in diameter. Make sure the bits you use are coated with carbide or diamond; this information is usually visible on the package. You can also use hole saw bits to drill into stucco.