Get matched with top wallpaper removers in Burt, MI

Peel-and-stick wallpaper is designed to be removed without damaging walls, making it a good choice for renters or temporary design changes. However, damage to paint or drywall can occur under certain conditions. To prevent issues, the wall surface must be properly prepared before application—it should be clean, smooth, dry, and correctly primed or painted. Applying wallpaper to a freshly painted surface can cause the paint to peel off during removal. Additionally, removing the wallpaper too quickly or aggressively can also cause damage. For best results, always follow the manufacturer's instructions for both application and removal.

To remove pre-pasted wallpaper, you’ll need to wet the wallpaper or steam it to loosen the paste on the back of the wallpaper. Spray the paper with water, then let it soak for 10 to 20 minutes. From there, you should be able to peel off the wallpaper. Then, you may need to follow up with a cleaning solution and a scraper to remove any remaining wallpaper paste on the walls.

The cost varies from $1 to $3 per square foot, depending on the type of wallpaper, the wall condition, and the labor involved.

While it is possible to paint over wallpaper, it is generally better to remove it first to guarantee a smooth, professional finish. Painting over wallpaper can save time, but it may lead to issues if not done correctly.

You can paint over existing wallpaper if it is in excellent condition: smooth, non-textured, clean, and firmly adhered to the wall. Ensure there are no bumps, tears, or peeling areas, and that all corners and seams are securely glued down. You might also consider painting over wallpaper if removing it would damage the underlying wall. Additionally, some wallpapers are specifically designed to be paintable, which can add texture to a room.

However, there are risks. If the wallpaper is textured, damaged, or peeling, these imperfections will show through the new paint. The moisture from the paint can also loosen the wallpaper's adhesive, causing it to bubble and potentially damage the wall. To mitigate these issues, clean the surface thoroughly and use an oil-based primer to help the paint adhere and prevent the old adhesive from bleeding through.