The cost to install or replace brick or stone siding generally ranges from $10 to $50 per square foot. The final price depends on several factors, including the specific material type, local labor rates, and any necessary preparation work, such as removing old siding. For example, different types of stone have varying costs per square foot: natural stone ($4.50–$35), stone veneer ($11–$13), faux stone ($6–$9), and cultured or manufactured stone ($5–$8).

You may only need to repaint fiber cement siding every decade or so, but you should clean it every six to 12 months, depending on your local climate. First, wash with a garden hose or similar low-pressure device (not a high-pressure washer, which can damage the material) to remove dirt and any large debris. Then, gently wipe down the surface with a soft brush or cloth in a side-to-side motion, following the grain of the fiber cement.

Not wrapping a house before installing siding can lead to moisture intrusion, rot, mold, and even higher energy bills. Older houses may have siding installed without wrap underneath, so it’s a good idea to add a wrap layer when it comes time to replace old siding to prevent potential damage from water intrusion—local codes may even require it, so check with your municipal building authority. 

Hail as small as 3/4 inch (about the size of a penny) can cause damage to your siding. When hail reaches 1 inch in size, you can expect to see more cracks, chips, and holes, and hail that’s 1 and 1/4 to 1 and 1/2 inches around will cause significant damage. If you see hail that’s 1 and 1/2 inches to 2 inches or more in size, the damage is likely to be extensive and possibly even dangerous.