Get matched with top brush chipping pros in Strong, ME

The easiest way to remove bushes is first to cut the bush down. You may need to use a handsaw, pruning shears, or a chainsaw for thicker branches. Once you’ve removed most of the branches, you can then cut the base of the shrub as low to the ground as you can get. Then, with a shovel, dig around until you expose the roots. Dig out the roots, being careful not to leave any roots in the soil.

While a rented dumpster can handle a wide variety of materials, there are significant restrictions on what is allowed. Generally, you can dispose of most non-hazardous household junk, yard waste, and construction debris.

Accepted items typically include:

• Furniture, carpets, old linens, and toys

• Wood and yard debris

• Small appliances and excess trash

• Renovation waste like old finishes, building debris, and roofing materials (unless they contain lead paint or asbestos)

However, you cannot put toxic, flammable, or hazardous materials in a dumpster. Prohibited items almost always include:

• Paint, gasoline, oil, and other fuels

• Household cleaners and other chemicals

• Electronics, batteries, and tires

• Refrigerators, hot water tanks, and medical waste

Since regulations can vary by location and company, it is essential to check with your dumpster rental provider for their specific list of accepted and prohibited items before you begin.

Yes, you can absolutely make your own mulch, and there are a few ways to go about it. First, you can lay down pine needles or mulched leaves if you’re mulching in the fall. In the spring and summer, you can use mulched grass clippings. Alternatively, you can lay down a few layers of newspaper in your garden and gently wet the paper to keep it in place.

Clearing 1 acre of land takes anywhere from two to 12 hours for a professional team, depending on what they’re removing. The amount of time needed to complete the project depends on the size of your acreage, the land’s condition, the size of the crew completing the work, and what type of equipment they’re using. Smaller projects normally take a few hours, while larger projects may require one or two full workdays.