Best driveway gate pros near Patten, ME

When choosing a driveway gate, consider the fence material, whether you want an automatic gate or a manual one, and property limitations like the slope of your driveway. We recommend speaking with a professional driveway gate installer to see what types of gates will work on your property based on your fencing or home’s exterior. Keep in mind that driveway gates should range between 10 to 12 feet wide to ensure cars can easily maneuver through the gateway.

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.

It does matter which way a hinge is installed because it’s possible to install a hinge backward. The hinge pin should face the direction in which the door will swing, making the pin visible. Exterior doors that swing outward need a security hinge with an Allen set screw in the center to prevent someone from removing the hinge from the outside and accessing the home or business.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.