"Mr Oakes replaced two decks for us. His workmanship is top notch. Bob is a true person, honest, great work ethic. Weather played a factor in our decks and Bob kept us informed if he was delayed and cleaned up everyday. Bob will be doing more projects for us.. Thank you Mr Oakes!"
"I hired Zac to fix an Eve on my house. It came out exactly the way I hoped it would. He was fast, clean and very friendly. The price was exactly what we agreed on. He showed me the receipts for the materials and put what was leftover in a safe place at my house. Iâ m extremely happy with the way everything worked out and I look forward to hiring him for more projects in the future."
"Andy did an outstanding of stripping 150 years of paint off the Marshall Point Light in Port Clyde, Maine. The metal was taken down to bright with all paint and extensive rust being removed. This was coordinated with the painters who primed it as soon as it dried. All residue was caught and collected in tarps for proper disposal. No dust was produced. The brickworks and granite blocks were also cleaned down to original surface for priming and recoating. The job was completed timely despite inclement weather. I highly recommend Andy and Aqua Terra for any such project."
"Patrick Greatorex of Greatorex Home Improvement was very professional and knowledgeable. From demolition to clean up, we were impressed with Greatorex Home Improvement. They showed integrity in their work! Great job! I will hire again in the future"
"Ian Macmaster is a very reliable, very professional person and did an EXCELLENT job of installing carpet throughout the whole house. He also did an excellent job on installing ceramic tiles. Does a job from start to finish. We VERY HIGHLY recommend Ian for any job."
Frame to Finish is your one stop shop in the State of Maine for all your handyman and maid service needs. We are equipped to handle all projects, from large to small. We take great pride in providing the best in finished products and our customer's complete satisfaction is our top priority!\n\nCall us today for a free estimate!
Custom Finish Painting has been Serving the community with over 30 years of experience and with affordable rates and an excellent attention to detail. References are available and we pride ourselves on working around your schedule and respecting your privacy and property. We thank you in advance for allowing us to give your home the attention it deserves.\n\n \n\n
Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.
Yes, Ipe is more expensive than Trex decking—both in terms of materials and installation (plus, Ipe trees are endangered). On average, Ipe decking costs $10 to $25 per square foot, while Trex decking costs $5 to $12 per square foot. Because Ipe is harder to work with, the price of installation is higher, too. For Ipe decking, you’ll pay between $20 and $45 per square foot for labor. However, with Trex decking, the labor costs range from $8 to $22 per square foot.
Hangers are one way of attaching stair stringers to a deck. These metal hangers are usually adjustable, allowing you to find the ideal angle for a secure installation. They’re the best choice for installing longer staircases, such as one on a two-story deck, to reduce the load on the deck frame while keeping the stairs stable.
While experienced DIYers may take on the challenge, hiring a licensed professional is often the best route, especially for larger or elevated structures. A local deck contractor is typically the best pro for the job, as they have specialized experience and are knowledgeable about local building codes, ensuring your deck is built safely and designed to last. Other professionals who can build a deck include general contractors and carpenters, who may be more readily available in some regions.
Applying too much sealer to a deck might seem like extra protection, but it can cause more harm than good. Wood is a porous material with a limited capacity to absorb liquids. When you go overboard with sealer, the excess can't soak in and instead forms a film on the surface. This leftover layer is prone to peeling, cracking, and trapping moisture, ultimately defeating the purpose of sealing in the first place.
The Liberty, ME homeowners’ guide to deck cleaning services
From average costs to expert advice, get all the answers you need to get your job done.
Refinishing your deck is a great way to restore its appearance and fall in love with your outdoor space. Use this guide to learn how much it costs based on factors like size and type.
Learn how to clean a deck before staining to ensure long-lasting adhesion, weatherproofing, and optimum appearance of this coloring and protecting treatment.
Deck maintenance is vital to protecting a wooden deck. Cleaning, staining and sealing a deck after pressure washing will add years to its lifespan. Protect a deck by following these deck maintenance tips for cedar and other types of wood materials.
