Get matched with top stone countertop pros in Appleton, ME

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Consider how much and in what way you'll be using your marble countertops. Untreated marble can stain easily and even change color slowly over time. If you're worried about bathroom chemicals or extensive meal prep, opt for a type of marble with more protection against spills.

When it comes to the cost of your marble installation, consider the slab's thickness, overall size, and necessary cutouts for sinks and cabinetry.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

Different types of engineered stone countertops require varying installation methods. The best option is to hire a countertop installer, especially if you are unfamiliar with the stone you plan to use. Generally speaking, quartz is the easiest for DIYers because you can cut it on site with a diamond blade and diamond hole saw. The average DIYer is unlikely to have the special tools to cut sintered stone countertops. Before diving into a project, make sure you have the experience and tools to do the job correctly.