Top-rated deck cleaning pros.

Get matched with top deck cleaning pros in Vivian, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your deck cleaning project in Vivian, LA?

Select your specific project to find the pro for you.

Find Deck cleaning pros in Vivian

Avatar for RICHARD'S CUSTOM PAINTING, L.L.C.
RICHARD'S CUSTOM PAINTING, L.L.C.
4.5(
10
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Vivian, LA and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"I chose Richard's Painting to paint the exterior of my home. Mr. Richard came to my home and while here I mentioned I needed a new fence. Turns out Richard's Painting is a general contractor and can handle just about anything around your home. He and his son are professional, attentive and engaged with the customer. I would highly recommend Richard's Painting, LLC to anyone needing a good contractor."
Response time12 hrs
Response rate100%
Recommended by88%of homeowners
Gillespie Pressure Washing Service
4.7(
7
)
Deck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Vivian, LA and surrounding areas

In business since 2015

Free estimates

"when i was quoted the price over the phone I thought it was a little high. the siding was very dirty and had moss growing on it as it had not been cleaned in 20 years. she worked all day and the results were excellent. she was also very careful with the old siding and repaired anything that came apart in the process. I would us her again."
Clear_Vine
Freshly Cleaned Sidewalk
Finished home
Response time3 days
Recommended by100%of homeowners
Showing 1-10 of 39
Deck Cleaning questions, answered by experts

When installing deck boards, screws are generally a better option than nails. Screws offer superior holding strength over time, keeping the boards securely in place. In contrast, nails are more likely to pop out, which can create a tripping hazard. While you can use either, we recommend using 3-inch galvanized deck screws. To minimize the risk of cracking the wood, it's a good practice to drill small pilot holes before driving the screws into the deck joists.

Yes, and in some cases, frozen ground may improve the digging process for footings due to sturdier conditions. It’s easier than working in muddy conditions, which are more common in the spring. Contractors may use machinery that makes this step a breeze, so harder ground shouldn’t affect the building process.

Unless you’re using a 2-in-1 formula or painting over an existing coat of paint, it pays to apply a coat of primer ahead of your new paint. Decks see a lot of footfall and exposure to extreme and sudden temperature changes and moisture levels. The primer promotes better paint adhesion, moisture repellency, and a smoother finish, which means you’ll often need fewer coats of paint. 

Always sand a deck before repainting so the wood is smooth and ready for paint. While you do not need to fully remove paint before repainting, sanding helps remove any areas with weather and sun damage. Sanding also helps remove chipped or flaking paint and opens the wood pores to improve paint adhesion.

Deck skirting shouldn’t touch the ground, especially if you have a wood deck, which is vulnerable to moisture. Ideally, you should leave at least 3/4 of an inch of space between the deck skirting and the ground for more ventilation. Pros also recommend that you incorporate about 1 square foot of space for ventilation for the underside of the deck to every 150 square feet of decking. Proper ventilation prevents mold growth and rot that can damage your deck.

The Vivian, LA homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.