Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Mermentau, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Mermentau, LA?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Mermentau

Avatar for Pat Boutte Llc.
Pat Boutte Llc.
5.0(
1
)
Tile: Ceramic and Porcelain - Install

Serving Mermentau, LA and surrounding areas

Approved

Free estimates

Credit card accepted

"Pat Boutte is an outstanding carpenter/plumber/electrician. He and his crew,replaced a 3/4” by 4’x4’ section of floor under my toilet,also the 2x6 bracing under the same area installed a new sink. They installed new vinyl flooring in both the bathroom and hallway, also a new sink in back bathroom . Pat is great to work with easygoing.Thanks to Pat and his crew.Good job Tom Holt"
8 neighbors recently requested a quote
...
Showing 1-10 of 69
Ceramic Tile questions, answered by experts

The cost to install porcelain tile is about $1,930 on average. Porcelain tile prices range from $880 to $3,000 or more. The average cost tends to be higher than ceramic tile because porcelain tile is very durable. Porcelain tile rating also factors into the material cost. Tile ratings are as follows:

  • Grade 0: Walls only

  • Grade 1: Walls and light traffic floors

  • Grade 2: Rooms with light traffic, but not kitchens or hallways

  • Grade 3: Kitchens, hallways, and entryways

  • Grade 4: Any area, interior or exterior

  • Grade 5: Highest durability good for any area, interior or exterior

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

There are several tools that you will use together to install tiles. Four of the most basic tools needed in tile installation include a notched trowel for applying tile adhesive, a tile cutter or saw for cutting tiles to size, tile spacers for creating the appropriate amount of space between tiles, and a grout float for applying grout.

Figure out how much tile you need by measuring the backsplash area. Measure the height and length in feet and multiply to get the square footage. Don’t make adjustments for outlets or small cutouts but subtract the square footage for windows or other large obstructions from the total. To account for waste, get 10% more than your calculation.

Tile shouldn’t be set tight against the tub. Bathtubs can expand when filled, and they can shift slightly with the weight of occupants. For this reason, it’s important to leave a slight gap between the bathtub and the first row of tile. Aim for a narrow gap of approximately 1/16 of an inch, filled with caulk, to allow for this expansion and movement while still allowing for tile shower waterproofing.

The Mermentau, LA homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.