Get matched with top interior painters in Iowa, LA

In most cases, you’ll need two coats of paint to ensure proper coverage. If you put down a coat of primer first, you could get away with a single coat of paint, but you’ll likely still need two coats. The only exception would be if you’re painting with a light color over a dark color, in which case you may need three or four coats of paint to ensure the dark color doesn’t show through the new paint.

Limewash paint does not require sealing in the traditional sense. Unlike other paints, limewash forms a breathable, matte finish that evaporates moisture from the surface. However, a sealer or topcoat adds protection or durability. It can help enhance the paint's dirt, moisture, and abrasion resistance. Sealing limewash may alter its appearance, potentially affecting its natural matte finish. Therefore, whether to seal limewash depends on the project's specific requirements and desired aesthetic outcome.

For the best results, you should apply two coats of paint to your wrought iron fence. Let your first coat dry for about an hour then promptly apply your second coat.

A finishing layer is an important step in the staining process. A top coat helps make a stain last longer by protecting it from spills, scratches, and natural weathering.

A lacquer finish is thin, fast-drying, and best used for cabinets, molding, and trim. It’s not recommended for outdoor furniture. Another option is varnish, which has a glossy finish with a protective film and is often used on outdoor wood objects. Polyurethane, known as “liquid plastic,” dries quickly but doesn’t hold up well in the heat. Lastly, a shellac finish adds a warm tint to wood but is affected by heat.