Top-rated deck cleaning pros.

Best deck cleaning pros near Haynesville, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your deck cleaning project in Haynesville, LA?

Select your specific project to find the pro for you.

Top-Rated Deck cleaning pros in Haynesville - Updated Nov 2026

Gillespie Pressure Washing Service
4.7(
7
)
Deck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Haynesville, LA and surrounding areas

In business since 2015

Free estimates

"when i was quoted the price over the phone I thought it was a little high. the siding was very dirty and had moss growing on it as it had not been cleaned in 20 years. she worked all day and the results were excellent. she was also very careful with the old siding and repaired anything that came apart in the process. I would us her again."
Clear_Vine
Freshly Cleaned Sidewalk
Finished home
Response time3 days
Recommended by100%of homeowners
Showing 1-10 of 36
Deck Cleaning FAQs, answered by experts

Yes, you can build a deck around a fire pit, as long as it is safely enclosed, meets code requirements, and is at least 15 feet away from your home. You’ll want to ensure you have a heat-resistant barrier between the fire pit and your deck to prevent any structural damage and fires. A galvanized ring surrounded by pavers, brick, or stone makes for a beautiful, safe, and sturdy design.

The least expensive way to build a pool deck is with concrete deck blocks, pressure-treated lumber, and the appropriate hardware for hanging joists and securing deck boards. With these basic yet durable deck materials, you'll have a pool deck that's built to last without the high price tag. You should also stain or seal the deck to protect it against the elements.

A deck doesn’t have to be perfectly level. Many pros even recommend a gentle slope to ensure proper drainage and increase longevity. The ideal gentle slope is about 1/8 to 1/4 inch per foot away from the property, leading water away from the home to prevent pooling and reduce the risk of damage. It also minimizes rot, mold, and other moisture-related problems. 

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.

The Haynesville, LA homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.