Get matched with top flooring contractors in Gueydan, LA

Whether you install flooring before or after kitchen cabinets depends primarily on the type of flooring you are using. For materials like hardwood, tile, and sheet flooring, the best practice is to install the flooring first. This ensures the cabinets are installed at the correct height and on a stable surface. However, you should not install cabinets on top of floating floors, such as laminate or luxury vinyl plank (LVP). These types of flooring need room to expand and contract with temperature and humidity changes. Placing heavy cabinets on top can restrict this movement, potentially causing the floor to buckle and making the cabinets unstable. For floating floors, install the cabinets first and then lay the flooring up to them. Other reasons to consider installing cabinets before the flooring include saving money on materials (since you won't need flooring under the cabinets) and avoiding potential damage to your new floor during cabinet installation. Additionally, installing cabinets directly on the subfloor might prevent voiding your flooring's warranty.

In a wet room, you need a floor that won’t sustain damage with constant exposure to water, but your options are normally the same as with a bathroom. Ceramic and porcelain tile are suitable options, as are natural stone like granite and marble, much like in a standard bathroom. Since a wet room’s floor is more likely to be wet, you should choose a flooring option with some texture to reduce how slippery the material gets.

When you install laminate flooring, you have to install spacers (also called expansion gaps) along the edges. This space along the edges gives the flooring the room it needs to naturally expand and contract. When you don't have an expansion gap, you can end up with damaged or warped planks. This can lead to uneven flooring, which is unsightly and can cause a trip hazard.

No subflooring is perfectly level, but you should never ignore any noticeable floor sagging. Most contractors deem a floor that slopes by a 1/2 inch to 1 inch per 20 feet of floor acceptable. Further investigation is required when the slope or sag is more than one and a half inches.