Get matched with top gas log pros in Mount Sterling, KY

In most cases, yes, it’s safe to light a gas water heater manually, but you should shut the gas off first, open a window, and let the space air out for about 10 minutes. Modern water heaters shut the gas off entirely if the pilot light goes out, but airing out the area beforehand is good practice and will ensure it’s safe to relight your pilot light manually. Just make sure you turn the gas valve to “pilot” before lighting. If the light keeps going out or won’t light at all, call in a professional.

The size of a pipe isn’t always the outside or inside diameter. Rather, it’s a nominal diameter that depends on the type of pipe. For male pipes, you’ll need to measure the outside diameter. For female pipes, you’ll need to measure the inside diameter. You’ll then need to use a nominal diameter conversion chart to get the actual pipe size you’d buy in the store.

In some ways, yes, and in some ways, no. As for how they’re the same, propane and gas both burn via the same process, combustion, and at the same temperature, around 3,600 degrees Fahrenheit. The difference is that propane produces more heat per unit than gas. One cubic foot of propane contains 2,516 BTU, while one cubic foot of gas contains 1,030 BTU.

The easiest way to empty a propane tank is to simply use it until no propane remains. If you’re short on time and need a faster solution, transfer the propane to another tank instead. Wear leather gloves to protect your hands, then connect the hoses from both propane tanks and seal them tightly. Turn the knob to open the supply tank valve on the full tank and let it run until the pressure pushes all the propane into the other tank. When all propane is transferred, remove the hose and seal each tank.