With years of experience serving the area, we are your solution for all your construction needs. We take great pride in our extreme professionalism, timeliness and superior customer service on every job. We make sure to develop a lasting relationship so that the next time service is needed there will be no question on who to call. Check out our 5 star reviews from happy customers! Call us today so we can discuss your needs and make a plan that fits your budget. Satisfaction guaranteed!\n\n
Complete Structural Installations, A Fasflow, dealer has been in business since 1978. We have over 40 years experience. Our specialty is foundation and waterproofing repair and installation. \n\nOur founder, Ed Jernigan, started doing business in 1978 and we have installed over 44,000 jobs owned and operated by Mr. Jernigan. Mr. Jernigan also has several dealers throughout the Unites States. Our local company is owned and operated by the employees, which makes each of us dedicated to providing you our very best. Our future depends upon our customers. \n\nNo one can match our products and services. We offer a full range of products, unlike our competitors who are either a franchise or dealers who are restricted to only their products lines. This allows us to customize a solution to meet your needs.\n
We pride our company on reliability, great communication, integrity and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!
"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
We offer quality and affordable handyman services. Looking for reliable and skilled professionals for your handyman project? Look no further than Willifords Handyman and Pressure Washing. Our team of experts in Kentucky (Other) is dedicated to delivering top-notch solutions. With our attention to detail and commitment to customer satisfaction, we guarantee exceptional results. Contact us today for all your handyman needs!
"Alford removed a carpenter bee damaged porch deck and replaced the 6 x 25 foot decking under the existing roof. The project was designed and installed with quality materials and professional workmanship. In the Charleston area, Alford was the most prompt and reliable company we dealt while trying to obtain bids for the deck replacement."
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
"It was okay but the woman who came out was a little bit too concerned about speaking her own mind and I do not think that the time frame was long enough for her to really get a grasp of what it was that we were looking to do. She had some good ideas but it was not enough to convince me to go further and purchase an additional time, however, we had a particularly challenging project. It was not like it was a simple little thing and I threw a lot at her. She was not particularly prepared when she came so we had to spend part of the time getting her prepared. I had sent her an email in advance with the pictures and everything and said, "Here, so that you are going to be thinking about this before our call." And when she got on there, she had not really done that. So, that took some of the time for me to go and say, "Okay, take a look at the email. Here are the pictures." She did not come ready to go with advice and that was a little bit disappointing. The advice that she had was good but it did not solve my problem and it did not convince me to purchase additional time. I was not unhappy with her. It just did not wow me. It was what it was and it was fine. She came out within the time frame that we purchased the deal because we had just purchased the house. We were living in North Carolina and we purchased the house in Florida. We moved on December 2nd so it was between the date that we purchased the deal and December 2nd because we had to talk to her about what we wanted to change about the house before we moved. Ours was not your typical project. If somebody came in and just showed her a picture of a room with blank walls and they wanted her to help decorate it, I think that she could do that but ours was pretty hard."
We have three generations of masonry experience combined into one company. New construction, repairs, & restoration. We will happily do it all (no job too big or small). We do all work ourselves (no subcontracting). We are with you and your project from start to finish.
"Jimmy has always been top notch in my book! I have known him for about 20 years and he is excellent with carpentry work and more. He has helped me by building rooms, putting in a dish washer, building the back of my house, and putting in double doors for my sister. He has also never been late since he is such a man of his word!"
When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project.
In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.
If you remove a load-bearing wall to create an entrance to a carport or covered patio, you can expect to pay between $3,200 and $9,500, with an average cost of $6,400. Factors such as the type of addition and if that area needs additional work will add to the price.
New builds, remodels, and additions often necessitate professional framing expertise.
When building a house, it is customary to use 16d nails that measure 3 1/2 inches in length to construct the frame. These nails are crucial in providing the necessary support and stability for structural elements like joists and studs, which ensures a sturdy framework.
The Lynch, KY homeowners’ guide to carpentry services
From average costs to expert advice, get all the answers you need to get your job done.
Add a wow factor to your home with a chandelier. Chandelier installation costs depend on style, location, and labor, so learn what you can expect to budget.
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
