Get matched with top leather and vinyl repair specialists in Washington, KS

Uneven floors often signal structural issues in a home, so taking them seriously is vital. If you buy an older home with slightly uneven floors, check that your inspector thoroughly inspects the foundation to catch any potential issues early. And if you notice that your floors are becoming more uneven over time, call a pro to check your foundation ASAP.

Although it isn’t recommended to use more than 1,500 pounds of force per square inch (or PSI) on delicate siding materials like wood and metal, it’s safe to use more than that on surfaces made of stone, cement, and, yes, vinyl. In most cases, you can use up to 3,500 PSI without any problems, though you’ll want to make sure to use a tip with a spray span that better disperses this pressure, like a green or yellow tip.

If there’s minimal buckling and it was caused by minor moisture damage, the planks may lay flat again once you’ve addressed the underlying issue. However, laminate floors that have experienced significant moisture damage won’t lay flat and must be replaced. If the issue only affects one or two boards, you can replace them yourself relatively easily. However, it’s best to call a pro if the problem is more widespread.

Houses naturally settle over time, but they should settle uniformly with no apparent settling in one spot. If your floor is uneven but only in a particular area of your home, differential settlement could be the problem. This can be caused by improper drainage, erosion, expanding soil, earthquake activity, or poor construction techniques.