Get matched with top sonic cleaning pros in Mission, KS

Soft washing chemicals typically consist of a mix of sodium hypochlorite (or a chemical component of bleach) and water. While sodium hypochlorite and bleach are often thought to be the same thing, there is one small but key difference between the two: sodium hypochlorite comes in powdered rather than liquid form, which means that it’s also more concentrated and more effective from less product overall.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

While spotting a bit of algae on your roof may not bother you at first glance, it is certainly bothering your roof shingles. The presence of algae can cause decay and shorten the lifespan of your roof’s shingles, which can lead to much bigger problems down the road. While this issue may seem cosmetic at first glance, it goes much deeper than that.

If you wish to forego painting your shingles but still want to give them a fresh look, a deep cleaning is the first step. Clean off any debris from your roof and gutters, and then power wash your shingles to get grime and algae off. To take things one step further, you might even consider installing new gutters to give your home a bright new look.