Get matched with top patio pros in Liberal, KS

While it may be less expensive initially to lay concrete vs. pavers, the long-term expenses that come with repairing concrete may prove to be less cost-friendly than simply replacing a few damaged pavers. On top of that, stamped concrete may only last for 25 years compared to pavers, which can last over 50 years.

The cost to pour a driveway apron depends on the material and size. Concrete costs $3 to $10 per square foot, asphalt ranges from $2 to $5, and pavers are $5 to $15 per square foot. Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between $540 and $1,800, depending on local rates and additional work required. Always consult a local driveway paving contractor to get an accurate estimate tailored to your project.

Most standard concrete patios are around 4 inches deep. However, concrete patios that need to support very heavy items, like a hot tub or outdoor kitchen, should be around 6 inches thick to support the full weight of these items. You'll also want to make sure you install rebar for patios that need to support a lot of weight like this.

In most cases, you’ll want your patio to be 4 inches thick, although you should add reinforcement and increase the thickness up to around 8 inches if you want it to support heavier loads and resist cracking more readily. Although thicker slabs will cost more, you’ll start seeing diminishing returns at around 6 inches.