Get matched with top generator install pros in Liberal, KS

Carbon monoxide emissions aren’t only dangerous to human life, but they also harm our planet. While natural gas generators emit lower levels of CO than other fuel sources, there are still ways to reduce emission levels. For example, shop around for an eco-friendly generator that complies with current emission standards. Also, make sure your generator is serviced regularly to avoid CO buildup. 

It is safe to run a generator continuously, but you must follow safety protocols to ensure personal and home safety. Read the manufacturer’s instructions for specific recommendations, but the general recommendation is to turn generators off overnight or when you’re away from the house. Overworked generators can pose a fire hazard and if your generator is not in a well-ventilated area, running it continuously could lead to carbon monoxide poisoning.

In most municipalities, you will need a permit to install a permanent home generator, including emergency backup, partial-home, and whole-home generators. A permit for a generator usually costs between $50 and $250, depending on where you live. Your electrician or certified generator installer will usually pull the permit for you—and might be required to do so by your building department—but you’ll be on the hook for the cost of the permit. You should ask your installer before agreeing to any work if they will pull the necessary permits for your project.

You can determine what size generator you need by listing the various appliances it will power during an outage. Write down the start-up watt usage, and then add them all together. 

A 7,500-watt generator will run your refrigerator, freezer, well pump, and lighting circuits without a problem. However, you’ll need an extra 3,000 to 4,500 watts to run your water heater and another 5,000 to 25,000 watts to run your electric furnace. In these instances, a whole-home generator is your best bet for running your critical equipment.