Get matched with top animal fencing pros in Ellsworth, KS

You should stain both sides of your fence to get the full benefits. Fences often fall along property lines, so you may want to save a buck by leaving your neighbor’s side in the dust. If you do that, all you get is a slightly better view. Moisture and UV rays can still sneak in through the side that’s unpainted or worn down and damage your fence. Rot and rust will spread, even if you can’t see it from your side of the lawn.

Your wooden gate post hole should be a third to a half of the height of the post. Also, note that the diameter of the post hole should be three times the diameter of the post. You should set the post in concrete to ensure a long-lasting and durable post that will withstand the test of time.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

A fence post set in concrete lasts anywhere from five to over 25 years, depending on how well the concrete was applied and the fence post’s material. Untreated wood posts in concrete could last less than 10 years, but a durable, treated wood set in properly applied concrete could last a few decades. However, all fence posts will wear out eventually, so expect to need to replace your fence post every five to 15 years.