Get matched with top sonic cleaning pros in Spencer, IN

Moss grows in dark areas of roofs, including in corners and gutters. If left alone, it can grow under roofing and cause permanent damage. Here’s how to remove moss from metal roofs: 

• Soak the moss to soften it

• Scrub it away with a soft-bristled brush, or pick it off with your hands (be sure to wear gloves)

• Use a moss remover that’s compatible with metal roofing, following the manufacturer’s directions

• Remove dead moss and rinse the roof thoroughly

• Prevent future moss growth by trimming branches, cleaning gutters, and attaching zinc strips to moss-prone areas

Tile roofs, including clay, concrete, and slate, are considered low-maintenance materials that require fewer repairs and less care than many other roofing options.

• Clay tiles require minimal maintenance. They stand up well to the elements and UV radiation, repel water, and do not easily stain, discolor, or fade in direct sunlight. Clay tiles do not need sealing. Maintenance is typically only required to replace cracked tiles, which can be caused by foot traffic, extreme weather, or fallen tree limbs.

• Concrete tiles are also low-maintenance but require more upkeep than clay. They need to be sealed every few years to maintain water resistance, and their color tends to fade more quickly than clay.

Aside from these material-specific needs, general maintenance for tile roofs includes annual inspections, routine gutter cleaning, and addressing repairs as they arise. A well-maintained tile roof can provide 50 to 100 years or more of protection for your home.

Yes, and they do it exceptionally well. Heated roof cables have two purposes: melting snow and preventing ice buildup. Ice damming happens when ice forms on the roof (usually where the roof meets the gutter) and melts stubbornly slowly, causing moisture to enter the roof itself and, therefore, the home.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.