Get matched with top woodworkers in Bluffton, IN

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: Do joists sit on beams?

• <div><p>Joists do distribute their load to beams, but they don&rsquo;t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you&rsquo;ll never see a joist sitting on top of a beam or another joist.</p></div>

Q: Can I cope crown molding with an angle grinder?

• <div><p>If you don&rsquo;t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You&rsquo;ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding. </p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: What is the difference between a spindle and a baluster?

• <div><p>Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Bluffton, IN?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Bluffton, IN

*The Angi rating for Woodworking companies in Bluffton, IN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Bluffton, IN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on June 01, 2026

Reviewed in June 2026
We hired AJ and Kyler to build a fence on the side of our yard, put grass in, trim our bushes, mulch around the bushes, and clean up the landscaping. They were so great to work with! They started working and got it done very quickly! They were super responsive and communicated very well! They...
AK SOLUTIONS LANDSCAPING LLC
Request a quote
Reviewed in March 2026
I am very happy with the work they did on my property. Removal of dead trees, brush and trash from a garage clean out. They are professional, kind, affordable and appreciative. I will be using them for all my projects and needs in the future for sure.
Garcias Removal Service
Request a quote
Reviewed in May 2025
What an amazing company. Had to have a huge limb removed quickly, I reached out to the company, he immediately came out and within a few short hrs job done! Complete, cleaned up, stacked wood for us.. I would HIGHLY recommend this company. They are true to their word, and trustworthy. So happy...
Long Horn Tree Solution
Request a quote
Reviewed in October 2024
Work was done In a timely manor and done well. Thanks for your service. I would highly recommend
Catalyst Roofing & Siding, LLC
Request a quote
Reviewed in October 2024
Excellent workmanship and service. Really appreciated the care the crew took to check around the yard for any materials. They went around the house several times with multiple people to make sure.
Shield Exteriors
Request a quote
Reviewed in September 2024
They did amazing work. Very careful when taking a large tree down in our backyard. They also did a great job of cleaning up the mess as well! I would hire them again!
KZ Tree And Outdoor Services LLC
Request a quote
Reviewed in February 2024
Randy was very professional and prompt in having all the items done we had requested. We had flooring installed throughout the house as well as some trim put up. Then later on, I had him fix some things on my storage shed. He did an amazing job! He is fairly priced and every penny spent is well...
Harris Group LLC
Request a quote
Reviewed in February 2024
I have used wild safari moving personally, my parents, sisters and nieces as well. They do a fantastic job from beginning to end. Brent Garrett in sales walks you through the process, communicates throughout the move and makes sure it all happens correctly, on time and for the agreed upon price....
Wild Safari Moving, LLC
Request a quote
Reviewed in January 2024
Stonecraft is a quality landscape company. They are great to work with and are extremely good at communicating with us. They are meticulous, knowledgeable and have made our home and lake house outdoor areas beautiful!
Stonecraft
Request a quote
Reviewed in August 2023
We hired them to wash our rental property, clean out gutters and paint trim around doors. Everything looked amazing. Will be a returning customer. Highly recommend.
Diamond Clean Exteriors, LLC
Request a quote

Find Woodworkers in Bluffton

Stonecraft

5.0(

)

Arbor, Pergola or Trellis - Build Custom

Serving Bluffton, IN and surrounding areas

Approved

In business since 2010

Warranties offered

Small jobs welcome

"Stonecraft is a quality landscape company. They are great to work with and are extremely good at communicating with us. They are meticulous, knowledgeable and have made our home and lake house outdoor areas beautiful!"

Response time1 day

3 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Quality Built Pergolas

4.3(

122

)

Arbor, Pergola or Trellis - Build Custom

Serving Bluffton, IN and surrounding areas

Approved

In business since 2010

Free estimates

Credit card accepted

"QBP was a fantastic company to have help us with our pavilion! The whole process was smooth and easy and we are extremely happy with our project!"

7 neighbors recently requested a quote

Recommended by92%of homeowners

Request Quote

Crestview Woodworking

5.0(

)

Custom Cabinets - Build

Serving Bluffton, IN and surrounding areas

Approved

In business since 2006

Free estimates

Small jobs welcome

"They outfitted my library with wrap-around built-in shelving. Also built and installed custom mudroom bench/hutch. Excellent workmanship, personable and professional service. Highly recommend."

Response time2 days

Response rate91%

7 neighbors recently requested a quote

Wood Stairs and Railings - Install or Replace

Serving Bluffton, IN and surrounding areas

Approved

In business since 2012

Free estimates

Emergency services offered

"Great work. Would recommend them. Royce and his crew did a terrific job. Very professional."

2 neighbors recently requested a quote

Recommended by92%of homeowners

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - Install

Serving Bluffton, IN and surrounding areas

Approved

In business since 2011

Free estimates

Customers say: Quick response

"Very good quality of work. Everything cleaned up when done."

+28

Response time2 days

Response rate85%

Recommended by100%of homeowners

Request Quote

JMD Home Services LLC

New to Angi

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+6 more

Serving Bluffton, IN and surrounding areas

Approved

Free estimates

Small jobs welcome

Hi there! I have about 9 years of experience with home remodeling, house flips, and currently I am focused more on carpentry (custom closets, interior/exterior trim, etc.) and flooring. I am still open to most home repair needs. I am new to Angi, but feel free to check out some photos of my work in the project photos. I am also willing to share more photos. Feel free to email me at [email protected] or call/text at 3179032308. Thanks!

Request Quote

Grogan's Workshop

New to Angi

Gazebo or Freestanding Porch - Repair

Serving Bluffton, IN and surrounding areas

Approved

Hello,\n\nI'm Brian and have a lot of experience doing just about everything a handyman can do. I'm certain you will be pleased with the job. I am a retired law enforcement officer and currently in the transportation profession, but would like to build up my own business. \n\nThanks!

Request Quote

Nunez General Construction Llc

New to Angi

Carpentry Framing - Install

Serving Bluffton, IN and surrounding areas

Approved

Free estimates

Credit card accepted

Offers commercial services

With three years of hands-on experience in framing, remodeling, and home additions, We provide reliable and detail-oriented work throughout all Indiana and Ohio. We have experience with residential & commercial framing, renovations, and structural improvements.\n\nI believe in doing things the right way — solid structure, clean finishes, and clear communication. My goal is to deliver quality results that homeowners can trust.

Request Quote

George Summerfield

New to Angi

Arbor, Pergola or Trellis - Build Custom - For BusinessGazebo or Freestanding Porch - Repair - For Business

Serving Bluffton, IN and surrounding areas

Approved

Well rounded Carpenter/Handyman with over 20 years of experience. Can even handle small electrical and plumbing tasks as long as it doesn’t need licenses

Request Quote

Handy Hawg, LLC

New to Angi

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+8 more

Serving Bluffton, IN and surrounding areas

Approved

Take pride in my work. Great quality work at low costs. Guarantee my work.

Request Quote

...

Showing 1-10 of 99

Woodworking questions, answered by experts

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters.

The Bluffton, IN homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.