Top-rated well and pump technicians.

Best well and pump technicians near Sumner, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your well and pump service project in Sumner, IL?

Select your specific project to find the pro for you.

Top-Rated Well and pump technicians in Sumner - Updated Nov 2026

Avatar for Crawlspace / Basement Waterproofing Solution
Crawlspace / Basement Waterproofing Solution
4.4(
256
)
Well Pump - Install or ReplaceWell Pump - Repair or Service

Serving Sumner, IL and surrounding areas

In business since 1998

Free estimates

Credit card accepted

"This review is well over due. Now that we have the drain tile system we have not received any flooding The day he began Brian's team came to our house promptly in the morning at 8am. They immediately started jack hammering the floor around the perimeter of the basement. While two men jack hammered on opposite ends the rest of the team followed behind them clearing debris and bringing the large pieces to a truck to be hauled away. They then installed the drain pipe, sump pumps, and poured cement. They were able to compete the project within 8 hours. I was definitely impressed! Now that it is a year later with 3 seasons behind us we cannot complain about his installation of the drainage system. Furthermore, one year later he still provided us with exceptional customer service. Oddly enough our pipes connected to our sump pump that takes the water from the drain tile to the backyard became detached. He responded asap with putting the detached pipes from the sump pump back together and making sure what happened will not happen again. What I liked about him in comparison to the other companies was his approach. No sales techniques, nothing gimmicky just genuine and straight shooter type of guy. He believes in his service, no thrills and whistles to the product. Just common sense solutions with quality service. It's your house your investment. Call this guy, no "BS" to it. He won't let you down.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+13

Recommended by90%of homeowners
Avatar for Choice Home Warranty
Choice Home Warranty
4.0(
5,678
)
Well Pump - Install or ReplaceWell Pump - Repair or Service

Serving Sumner, IL and surrounding areas

In business since 2008

Emergency services offered

Credit card accepted

"Called in claim on 6/18; tech assigned on 6 /19; so far so good. Claim was for failed well pump with NO water to my home with two disabled seniors. Due to heavy workload and no extra pay on weekends the tech came for diagnostics 4 days later. He verified the failed pump and tried to purchase one at Home Depot. None in stock, had to be ordered. Pump came in on 6/30 and tech arrived today, 7/1, and expertly installed the new pump. Choice has a $ 500 limit on well repair, which is 1/3 of a typical bill. That dollar cap is riduculous. On a positive note, C-Force provides expert work for Choice and would be my choice for any future work."
Recommended by81%of homeowners
Wells and Pumps FAQs, answered by experts

If you notice that your well pump runs continuously, it’s important to take action quickly to avoid further damage. A few common issues may be to blame for a continuously running well pump, such as mechanical damage, a faulty pressure control switch, low water level, prime loss, and leaking pipes and fixtures.

Several signs can indicate a faulty well pump pressure switch. These include your pump running continuously, the pump not turning on at all, or a sudden and complete loss of water. Other symptoms are weak water pressure or an erratic, unpredictable water flow from your fixtures. If you notice these issues, the pressure switch may be the cause. Testing the switch can help diagnose the problem. A faulty switch will likely need to be repaired or replaced. If the issue is more complex, it's best to consult a professional well technician to ensure your water supply is restored correctly.

The pressure in a well pressure tank should be set 2 to 3 PSI below the pump's cut-on pressure. The cut-on pressure is the lower number in the pressure setting (e.g., the '30' in 30/50 PSI) and is the point at which the pump starts. The cut-out pressure is the higher number, where the pump stops.

For example:

  • If your pressure switch is set to 30/50 PSI, the tank pressure should be 27-28 PSI.

  • If your pressure switch is set to 40/60 PSI, the tank pressure should be 38 PSI.

Common pressure settings for household applications include 20/40, 30/50, and 40/60 PSI. The difference between the cut-on and cut-out pressure is typically 20 PSI.

Age is certainly a factor in well pump failure. The older your pump, the more likely it is to fail. 

Beyond age, other factors can cause your well pump to fail, too. Things like poor water quality can cause sediment buildup in your pump. Without proper cleaning, your pump can seize up and fail. Having a dry well for too long can also cause your pump to fail, as it keeps working even though there's no water for it to pull. 

Through testing for pH, bacteria, and contaminants, ensuring safe consumption.

The Sumner, IL homeowners’ guide to well and pump services

From average costs to expert advice, get all the answers you need to get your job done.