Get matched with top carpet cleaners in Macon, IL

Unless you have a steam cleaner with an extractor (which is what most professionals use), a steam cleaner only breaks up all the dirt and grime stuck to your flooring and doesn’t actually remove the dirt. After a steam clean, the key to getting rid of dirt and grime is going back over it with a vacuum, mop, or microfiber cloth.

Vinegar and baking soda can be effective for removing old carpet stains, although success may depend on the type of stain. There are two common methods for this process.

One method involves combining the ingredients directly on the stain to create a chemical reaction. First, pour a generous layer of dry baking soda over the stain. In a spray bottle, mix distilled white vinegar with 1 cup of warm water and a few drops of liquid dish soap, then spray this solution thoroughly over the baking soda. The mixture will foam as the acidic vinegar reacts with the basic baking soda, which helps loosen and lift the stain. Let this sit for a few hours until it dries, then wipe or vacuum up the residue and blot the area with a clean, dry towel. You can repeat the process if the stain persists.

An alternative method suggests using the ingredients separately. Start by sprinkling baking soda on the stain and letting it sit for 15 to 30 minutes before vacuuming it up. Next, blot the remaining stain with a solution of equal parts white vinegar and water, and then blot the area dry with a clean cloth.

Without the proper cleaning techniques and products, your couch may look worn out and discolored after cleaning. This happens when you use too much water or soap, or use the wrong cleaning product for your couch’s fabric. To avoid an unsightly couch after cleaning, double-check that you’re using the correct amount of an approved cleaner along with the proper techniques.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.