Get matched with top flooring contractors in Loda, IL

Berber is the most expensive type of carpet, followed by textured carpet. Berber costs $3 to $20 per square foot, and textured carpet ranges from $1 to $12 per square foot. Berber features fibers arranged in short, thick loops, making it extraordinarily durable. The most expensive carpet material is wool, followed by acrylic, Triexta, and cotton. Wool costs $4 to $20 per square foot and is a beautiful, luxurious, and durable material. Acrylic, Triexta, and cotton range from $2 to $8 per square foot.

If you have a dark carpet and are going for a lighter look, you should replace it, rather than dyeing, since you can only go darker with dye. If your stains are too heavy to mask with carpet dye or the carpet is more than 10 years old, you should also consider replacing it.

The average cost to install an epoxy garage floor is $2,514, with typical projects ranging from $750 to over $5,716. On a per-square-foot basis, you can expect to pay between $3 and $12. Several factors influence the total cost, including the total square footage, required surface preparations, the type and thickness of the epoxy, design complexity, decorative options, and labor costs. For example, an epoxy floor for a one-car garage may cost between $720 and $2,900, while a two-car garage can range from $1,100 to $4,300. Adding decorative elements like flakes can cost about $10 per 250-pound bag, and choosing a metallic epoxy can increase the price to between $5 and $12 per square foot. With proper care and maintenance, a well-installed epoxy floor can last for 10 to 20 years.

Door transitions can work with virtually any flooring type; however, different transition strips lend themselves better to specific flooring types. For instance, if you are bridging the gap between a taller floor, like carpet, to a shorter floor, like hardwood, then you will want a transition strip with a slight slope to bridge the height difference. These transition strips are called reducer molding. On the other hand, if you are bridging two floors of the same height, you can use flat transition strips, such as T-strips and seam binders.