Get matched with top countertop and backsplash pros in Roberts, ID

Since knowing how to install countertops correctly requires in-depth knowledge and understanding of the topic, we recommend hiring a professional countertops installer near you to work on this project. Kitchen countertops are a high-visibility investment, meaning mistakes made during DIY installation will be easy to spot, may cause damage, and potentially require re-purchasing materials. Professional countertop installers have the skills, tools, and experience to place your new kitchen feature safely and correctly.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Marble countertops are often considered better than limestone because of their superior durability and luxurious appearance. Marble is harder and less prone to scratching and denting, though it still requires maintenance and sealing to prevent stains and etching. Marble is typically more expensive, but its beautiful veining and range of colors offer a high-end look. 

You attach solid surface counters with construction adhesive. Once your slab is ready, you fit it to the wall, apply the adhesive, and secure it in place with clamps until the glue dries. This usually takes several days. 

Afterward, you install the backsplash, faucets, and more. At this point, you can caulk the counter, allow it to dry for 24 hours, and then you're done with the installation.