Get matched with top structural engineers in Lincoln, ID

Q: What do structural engineers look for when doing an inspection?

• <div><p>Structural engineers typically conduct inspections during a home sale or renovation, looking for signs of structural damage in various structures throughout the building, such as load-bearing walls, joists, beams, roofing trusses, foundations, and chimneys. Some of the warning signs that structural engineers check for include:</p><ul><li><p>Dry rot</p></li><li><p>Infestation</p></li><li><p>Shifting or<a href="https://www.angi.com/articles/quarter-inch-crack-my-foundation-major-concern.htm"> cracking foundations</a></p></li><li><p>Erosion</p></li><li><p>Water damage</p></li><li><p>Sagging, shifting, or damaged walls, ceilings, or roofing support</p></li></ul><p></p></div>

Q: What is the hardest stage in building a house?

• <div><p>The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits. </p></div>

Q: Why should I add structural support for my house after I raise it?

• <div><p>If your home's foundation was damaged due to shifting soil, the same problem will reoccur unless you stabilize the structure by adding posts in the bedrock.</p></div>

Q: How can I tell if a home I purchased in an earthquake zone is bolted to the foundation?

• <div><p>Generally, you can tell if a home is bolted to the foundation by checking the foundation for plates. If you see that your foundational plates connect to wood or bolts protruding from them, this means that you have a bolted foundation. However, it's always wise to bring a home inspector in to confirm if your foundation is secure.</p></div>

Q: What’s the difference between an architect and an engineer?

• <div><p>The essential difference between an architect and an engineer is that architects typically focus more on the aesthetic design of buildings, although not without consideration for the structural integrity of the building. Engineers focus more on the structural, technical, and practical aspects of whether and how an architectural design can be built as drawn. You may need to hire both types of professionals if you&rsquo;re designing and building a new home.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Lincoln, ID?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Lincoln, ID

*The Angi rating for Structural Engineering companies in Lincoln, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Lincoln, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on November 24, 2025

Reviewed in November 2023
Annoyed with how the company is structured and lack of communication. Would recommend you try any other contractor before using them. Nice presentation and cool 3D rendering of house but once you sign is seems like hold your breath and hope something good happens.
DaBella - Idaho Falls (Roofing)
Request a quote
Reviewed in June 2023
Awesome work and communication throughout the project. Could not meet a more friendly and awesome couple. There were removed several large trees overhanging fence lines, power lines, property lines, and structures. They did such a good job that I referred them to my fathers home for additional...
5C Tree Cutters, LLC
Request a quote
Reviewed in December 2014
Interior steam cleaning including seats, dash, door panels, steering wheel, carpets, headliner, windows. Exterior wash and polish. Engine compartment steam cleaning and detail. Headlight restoration.
All Season Detail
Request a quote
Reviewed in September 2013
Kept the car for 2 days to check the engine. Learned it was the gas tank and not engine. Very thorough
Lithia Chrysler Jeep Dodge Of Pocatello
Request a quote
Reviewed in July 2013
The work went well few if any problems; owner made a trip to local hardware type store to purchase special colored screws, while repair shop owner removed the engine from the boat; flashing pieces were installed and motor was reattached to boat. The result was even better than hoped for, I could...
Ultra Marine Performance
Request a quote
Reviewed in June 2013
After the safety check was complete, the salesperson came out with a form that indicated that there was a major leak of coolant and engine oil from a failed head gasket. The repair for the head gasket was quoted at $1600. Since I had never had a problem with leaking oil or overheating, I asked...
Phil Meador Toyota
Request a quote
Reviewed in July 2011
My car was making ticking sound, much like when a car is running out of oil, but we knew we weren't out of oil, so we took it to Bill and Mike's. They discovered that the noise was coming from inside the engine block, they thought it was a lifter. After replacing three lifter's the car was...
Bill & Mikes Service Inc
Request a quote

Find Structural engineers in Lincoln

Meier Architecture • Engineering

No reviews yet

Meier Architecture • Engineering

No reviews yet

43 years of experience

Meier Architecture & Engineering, an Employee Owned company, is a full-service architectural and engineering consulting firm with Registered Architects and licensed Professional Engineers in Civil, Electrical, Mechanical, and Structural Engineering. Formed in 1982, has successfully completed more than 6,600 projects in the past 29 years. Meier Architecture & Engineering, an award winning company providing services from coast to coast, as well as worldwide, we are licensed in 28 states and serve as members of many professional, discipline-specific associations. Mindful of our future, members of our staff are also accredited in Leadership in Energy and Environmental Design (LEED).

Structural Engineering questions, answered by experts

Structural engineers typically conduct inspections during a home sale or renovation, looking for signs of structural damage in various structures throughout the building, such as load-bearing walls, joists, beams, roofing trusses, foundations, and chimneys. Some of the warning signs that structural engineers check for include:

Dry rot
Infestation
Shifting or cracking foundations
Erosion
Water damage
Sagging, shifting, or damaged walls, ceilings, or roofing support

The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits.

If your home's foundation was damaged due to shifting soil, the same problem will reoccur unless you stabilize the structure by adding posts in the bedrock.

Generally, you can tell if a home is bolted to the foundation by checking the foundation for plates. If you see that your foundational plates connect to wood or bolts protruding from them, this means that you have a bolted foundation. However, it's always wise to bring a home inspector in to confirm if your foundation is secure.

The essential difference between an architect and an engineer is that architects typically focus more on the aesthetic design of buildings, although not without consideration for the structural integrity of the building. Engineers focus more on the structural, technical, and practical aspects of whether and how an architectural design can be built as drawn. You may need to hire both types of professionals if you’re designing and building a new home.

The Lincoln, ID homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
Aug 14, 2025Aug 14, 2025
How Much Does a Structural Engineer Cost to Hire? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Dan Simms
•
Oct 13, 2025Oct 13, 2025
How Much Does Steel I-Beam Installation Cost? [2025 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Rachel Hoffman
•
Jun 6, 2025Jun 6, 2025
2025 Cost to Replace a Main House Support Beam
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Em Norton
•
Oct 23, 2024Oct 23, 2024
How to Hire a Structural Engineer: Complete Guide
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.
Rachel Hoffman
•
Oct 21, 2025Oct 21, 2025
How Much Does It Cost to Remove a Load-Bearing Wall? [2025 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Rachel Hoffman
•
Oct 20, 2025Oct 20, 2025
15 Warning Signs That a House Will Collapse
A home doesn’t collapse unexpectedly. Learn the warning signs that a house will collapse, so you can protect your family and your home.