Get matched with top structural engineers in Eden, ID

Q: Can I do my own structural calculations?

• <div><p>No, it&rsquo;s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.</p></div>

Q: Can I build over a stump?

• <div><p>Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well. </p></div>

Q: How thick are LVL beams?

• <div><p>The standard thickness for an LVL beam is between <b>1.75 inches and 7 inches</b>. However, you can order LVL beams in non-standard sizes as well. When you work with a contractor, they can source beams that are the appropriate size for your project for you after assessing your blueprints.</p></div>

Q: Why are studs 16 inches apart?

• <div><p>In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called &quot;on-center&quot; and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called &quot;advanced framing&quot;. This requires careful planning and adherence to local building codes to ensure structural integrity. </p></div>

Q: What exactly does a structural engineer do?

• <div><p>A structural engineer evaluates any structural components, like floors, foundations, walls, and roofs, to ensure they can support the structure. They also consider the soil quality in your area, potentially extreme weather conditions, and proximity to bodies of water and groundwater to ensure your building can withstand any stresses placed on it by the surrounding environment. Structural engineers work on both new and existing buildings.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Eden, ID?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Eden, ID

*The Angi rating for Structural Engineering companies in Eden, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Eden, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on December 25, 2025

Reviewed in August 2025
We purchased two new sliding glass doors at a home show. We wanted to replace ours because they were hard to slide open and closed. We have been VERY UNSATISFIED with Amazing Exteriors and REGRET ever buying them! They were a month late with the installation and never updated us to tell us when...
Amazing Exterior's of Idaho
Request a quote
Reviewed in December 2024
My contractor was amazing getting the work done just like we asked and in a timely manner even with all the other jobs they had going at the time
Revamp Rebuild & Drywall LLC
Request a quote
Reviewed in June 2023
Awesome work and communication throughout the project. Could not meet a more friendly and awesome couple. There were removed several large trees overhanging fence lines, power lines, property lines, and structures. They did such a good job that I referred them to my fathers home for additional...
5C Tree Cutters, LLC
Request a quote
Reviewed in September 2018
The owner of Red Rock Service and Repair, Ben Durfey, 1458 N 1180 E Shelley, Idaho. Ben checked the fifth wheel and told us what needed to be done. Later that day Ben gave a verbal quote on phone and we asked for a written estimate. We were told we needed to give him two thirds down. We gave him...
Red Rock RV Service and Repair
Request a quote
Reviewed in February 2014
Arrived on monday at 9am as agreed. Keith made quick work of the first side of the wall demolition. The most impressive aspect of his work throughout, and at the end of the first day; was how clean he maintained the work area! So, he worked quickly and cleaned things up as he worked. A very cool...
Hooked On Construction
Request a quote
Reviewed in October 2013
I have been searching for a new housecleaner since my former cleaner retired. Finding someone who does a good job and you feel good about working with is very difficult in this area. Irene and I initially spoke by phone and set up a time for her to come for her first cleaning. She was prompt,...
Irene Linder
Request a quote
Reviewed in September 2013
About a month ago the owner, Bob Potter, came to bid on the project. He offered suggestions and we agreed on what needed to be done. The evening before the work was done he called to say tomorrow is the day. Fortunately it worked out well for me. The short notice was a bit surprising. The crew...
ADVANTAGE TREE CARE
Request a quote
Reviewed in September 2013
Kept the car for 2 days to check the engine. Learned it was the gas tank and not engine. Very thorough
Lithia Chrysler Jeep Dodge Of Pocatello
Request a quote
Reviewed in August 2013
Jeff was very professional and had a good level of communication throughout the process. He is busy, and I had to wait a couple weeks before he could take my truck but it was worth the wait. He had the engine steam cleaned and called me with a preliminary diagnosis within a couple hours of...
Askew Machine and Perfomance-Jeff Askew South Side
Request a quote
Reviewed in July 2013
The work went well few if any problems; owner made a trip to local hardware type store to purchase special colored screws, while repair shop owner removed the engine from the boat; flashing pieces were installed and motor was reattached to boat. The result was even better than hoped for, I could...
Ultra Marine Performance
Request a quote

Find Structural engineers in Eden

Meier Architecture • Engineering

No reviews yet

Meier Architecture • Engineering

No reviews yet

43 years of experience

Meier Architecture & Engineering, an Employee Owned company, is a full-service architectural and engineering consulting firm with Registered Architects and licensed Professional Engineers in Civil, Electrical, Mechanical, and Structural Engineering. Formed in 1982, has successfully completed more than 6,600 projects in the past 29 years. Meier Architecture & Engineering, an award winning company providing services from coast to coast, as well as worldwide, we are licensed in 28 states and serve as members of many professional, discipline-specific associations. Mindful of our future, members of our staff are also accredited in Leadership in Energy and Environmental Design (LEED).

Structural Engineering questions, answered by experts

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well.

The standard thickness for an LVL beam is between 1.75 inches and 7 inches. However, you can order LVL beams in non-standard sizes as well. When you work with a contractor, they can source beams that are the appropriate size for your project for you after assessing your blueprints.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

A structural engineer evaluates any structural components, like floors, foundations, walls, and roofs, to ensure they can support the structure. They also consider the soil quality in your area, potentially extreme weather conditions, and proximity to bodies of water and groundwater to ensure your building can withstand any stresses placed on it by the surrounding environment. Structural engineers work on both new and existing buildings.

The Eden, ID homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Jeanine Gordon
•
Nov 25, 2025Nov 25, 2025
How Much Does It Cost to Hire a Structural Engineer in Dallas? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Dallas, TX.
Dan Simms
•
Oct 15, 2025Oct 15, 2025
How Much Does Beam Installation Cost [2025 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Jeanine Gordon
•
Nov 25, 2025Nov 25, 2025
How Much Does It Cost to Hire a Structural Engineer in Houston? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Houston, TX.
Rachel Hoffman
•
Nov 18, 2024Nov 18, 2024
Structural Steel Beam vs. Wood Beam: Which Is Right for You?
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
Mariel Loveland
•
Oct 20, 2025Oct 20, 2025
Ceiling Joist Spacing 101: How Far Apart Should I Space My Ceiling Joists?
The right ceiling joist spacing will help support your ceiling and prevent sagging, but there are a number of factors to consider. This guide can help.
Rachel Hoffman
•
Oct 20, 2025Oct 20, 2025
15 Warning Signs That a House Will Collapse
A home doesn’t collapse unexpectedly. Learn the warning signs that a house will collapse, so you can protect your family and your home.