Top-rated fountain pros.

Get matched with top fountain pros in Avoca, IA

Enter your zip and get matched with up to 5 pros

Need a pro for your fountain service project in Avoca, IA?

Select your specific project to find the pro for you.

Find Fountain pros in Avoca

No results for Fountain pro in

Try adjusting your search criteria.
Fountains questions, answered by experts

You have several options for your pond by getting your yard ready for the winter. You can winterize your koi pond by ensuring it’s at least 5 feet deep so it doesn’t freeze completely, installing a pond heater or aerator and having it run at all times, and installing a deicer if temperatures are dangerously low for an extended period. You can also choose to shut down your pond for the winter by removing all the wildlife in it and bringing it indoors, cleaning out the filter and pump, and then covering the pond with a tarp.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.

How many fish can call your pond home depends on the volume of the pond and the fish size. Your pond's filtration system also influences the number of fish that will thrive in a pond. A general rule of thumb is to have 1 inch of fish for every square foot in a pond that's 2 feet deep. Another rule of thumb you can follow is to have one koi fish for every 200 gallons of water or two goldfish for every 200 gallons.

When deciding whether or not to turn off your pump, you should consider your area’s climate and the aquatic life in your pond. If you live in an area with freezing winter temperatures and don’t have any wildlife, keeping your pump on could damage it. If you have aquatic life but live in a colder climate, you might consider keeping your pump running and adding a pond heater.

Yes, it’s possible to DIY a plunge pool and shave labor costs off of the project total. If you’re considering a DIY build, keep in mind that you will be responsible for pool installation and landscaping (which may require excavation). This type of DIY project is best left to particularly handy homeowners who have prior pool installation experience. 

The Avoca, IA homeowners’ guide to fountain services

From average costs to expert advice, get all the answers you need to get your job done.