Get matched with top roofers in Atkins, IA

The placement of snow guards depends on the individual roof, but typically snow guards are placed between 12 and 18 inches from the eaves, though they can be placed as close as six inches and as far as 24 inches from the eaves. A roofing professional can assess the roof and potential snow loads to determine the best placement.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

A roof's lifespan can range from 15 to 200 years, with an average of 25 to 50 years, depending heavily on the material, quality of installation, maintenance, and local climate. Asphalt shingle roofs are common and typically last 15 to 30 years; three-tab shingles have a lifespan of about 20 years, while architectural shingles can last up to 30. More durable materials have longer lifespans: metal roofs last 30 to 100 years, clay and concrete can last 50 to 100 years, and slate roofs can last up to 200 years with proper care. Regular maintenance, such as cleaning gutters and replacing damaged shingles, is crucial for extending the life of any roof.

Stripping existing shingles and installing a new shingle roof takes a professional one to two days, and sometimes up to three days for larger roofs. Additional safety measures necessary for steep roofs can extend the timeframe even further, as do added measures, like replacing roof decking or reinforcing your roof structure to support heavier materials like slate or clay.