Get matched with top deck staining pros in Walthourville, GA

Applying a sealer after staining is often recommended, especially for outdoor wood surfaces like decks or fences. It helps protect the wood from moisture, UV rays, and other elements, extending the life of the stain and preserving the wood's appearance. It also enhances the stain's durability and resistance to wear and tear. 

However, in some indoor applications, a sealer may not be necessary, depending on the type of stain used and the level of protection required. Always check the specific product recommendations and consider the wood's exposure and usage when deciding whether to apply a sealer after staining.

Applying too much sealer to a deck might seem like extra protection, but it can cause more harm than good. Wood is a porous material with a limited capacity to absorb liquids. When you go overboard with sealer, the excess can't soak in and instead forms a film on the surface. This leftover layer is prone to peeling, cracking, and trapping moisture, ultimately defeating the purpose of sealing in the first place. 

Ipe wood can last up to 75 years with minimal maintenance because its own oils help to preserve it. However, to get the most out of your Ipe wood deck, you should perform some routine maintenance, including regular cleaning, sweeping of leaves and debris, and rinsing spills with a hose. It’s also important to repair any deep scratches as soon as you spot them and reseal the deck annually to protect against scratches and scuffs.

Eggshell and satin finishes are best for porches because they sit in the sweet spot between scuffable matte and distracting high gloss. Your porch sees a fair amount of wear and tear, so you don’t want paint that’ll show every mark like matte, but you don’t want to be blinded by glossy paint in the sun either. Eggshell and satin have durability and a look that sits nicely in the middle.