Get matched with top locksmiths in Waco, GA

There are several ways to add security to a sliding glass door. To start, install a rod or deadbolt lock instead of the flip-lock that comes standard with most sliding glass doors. Add a sensor to the door and monitor any activity through your home security system.

Finally, installing shatterproof window film will help keep the structural integrity of the glass if it cracks.

Smart locks offer a similar level of safety to traditional or conventional locks because they often use comparable locking mechanisms, such as deadbolts. The primary difference is the access method: smart locks use a login or code instead of a physical key, which adds convenience. While not inherently safer, some smart locks have added security features that can deter intruders, like shutting down after too many incorrect code attempts or being harder to pick. For the best security, it's recommended to combine any lock with other home safety features like motion-activated lighting, security cameras, and window and door sensors.

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.