"Amazing! Orlando and his team did a wonderful job. They worked hard and fast. He communicated good and made sure we’re were pleased all along the way. I would definitely use them again. They replaced all our wood siding with colored Hardie Plank siding, so it’ll never rot and never need painting. They also replaced our 30 years old roof with asphalt shingles. I highly recommend this company."
Our full-service construction company is committed to delivering exceptional results for every client. With years of industry expertise, our team of seasoned professionals can tackle any project, from commercial and residential to industrial construction. Reach out today to discuss your project needs and receive a personalized quote!
MasterMind Construction has been in the roofing business since 2015!\nLicensed & Insured\nOur team specializes in asphalt shingle replacement & straight nail-on. \nOur team does not perform small repairs or patch small leaks. \nWe only do estimates for full tear-off and replacements only*\n2,000 square ft. or more \nTamko Heritage \nTamko Elite Glass Seal\nGAF Royal Sovereign\nGAF Timberline HD \nOwens Corning Supreme\nOwens Corning TruDefinition\nPlease contact our team to set up your free estimate today! \n706-601-9084 706-905-2365
We specialize in Metal and Shingle Roofing. We also offer installation of other roofing types, i.e., Spanish tile, cedar shakes and commercial flat roofing. Additionally, we install siding, windows, porches, decks and patio roof covers. We do not cut corners. Many of our competitors are less expensive but we make sure that your project is built 'to code', using superior labor and materials. We have been in the industry since 1993. We are privately owned, fully licensed and insured. Give us a call at 800.745.1998 today!!!
"I recently had the pleasure of working with Alpha Omega Siding for some siding repairs, and I could not be more satisfied with the experience. From start to finish, their professionalism shone through. The team completed the repairs in a timely manner, which I greatly appreciated. Communication was excellent throughout the process? every question I had was answered promptly, keeping me in the loop and easing any concerns I had. The pricing was fair and transparent, which is always a relief when undertaking home repairs. I would absolutely recommend Alpha Omega Siding to anyone in need of siding services, and I will certainly use them again in the future. Thank you, Alpha Omega Siding, for a job well done!"
"It went really well. Kevin was so very helpful with everything that was going on. I appreciate Kevin's expertise, kindness, and respect. I would definitely have him do other jobs for me and my house. The worker was very polite and do an excellent job. I am very happy with the job. Thank you Kevin and the man that fixed my siding ( sorry I didn't ask this name). Anyone reading this message here Kevin's Roofing and Remodeling."
"The work done on my rental house looks pretty good. Of course, there?s more to repair and paint work than what can be seen on the surface. Since I could only check in about once a day, I would generally have to trust that work was being performed to my expectations. It was on one of my daily stops that my crisis of confidence began. Some of my vertical window moldings had concave and cracked faces at their lower ends -- sure signs that they were rotting inside. I had pointed these out to Jason, when he came to bid the job. He had said they would be repaired with a Bondo-like filler, before being painted. What I found in my spot check, was that the cracks had been filled with caulk, as if they were simply going to be painted over, with no repair to the rot. I pointed this out to the painter, and told him that was not OK. He agreed, saying they had been caulked by mistake, and that the moldings would be repaired properly. I also spoke to Jason on the phone. He apologized, and said the bad spots would be replaced with new wood sectioned in. When I was called to the site on the last day, for final check and payment, I found that the moldings were not repaired, and had simply been painted over! I was probing them with a knife blade, but, Jason joined in with a screwdriver, gouging out rot from the moldings I had been aware of, and found several more moldings that needed repair. Jason said it would all be taken care of in the next hour or so. We also looked at a repair he had made to a rotted garage door frame that we had discussed on our initial meeting. At that meeting, we agreed that the wood should not run all the way to the concrete -- that being a common construction error that leads to rot. We agreed that there should be an uncaulked, 3/8 inch gap, to allow for air circulation, and to prevent wicking of water. I was SO glad to find someone that understood this commonsense approach to such a common problem. But, the repair DID run all the way to the to the concrete, and was caulked around. When I made note of that, Jason said it was not a problem, because he had used pressure-treated wood for the 4-inch repair section. He might be right. He might be wrong, with the contact still allowing water to wick up to the original wood above the repair. But, the real issue is that the repair was not done as we had agreed. I left for a while, so the rot repairs could be made, and so I might get a grip on my tension. It was about 90 minutes before I was called back. I spent most of that time asking myself questions like these: How could home repair guys either A), not recognize obviously rotted molding, or B), think it is ever OK to paint over rotten wood? How could they make the same mistake a second time, when it had already been pointed out to them? Could proper repairs be done to the rotted wood in the last 90 minutes of a week-long job? Had all other aspects of the work been done as we had agreed, and/or to accepted best practices? I DON'T KNOW, and, I don?t appreciate being forced to entertain such questions. When I got back, Jason showed me where he had sectioned in wood to the areas of worst rot, and had used Bondo-filler on the others. As we were going over the bill, he stated that he had not charged me for any rot repair, noting there was no line-item for it on the estimate. Really? Lacking any evidence to the contrary, I would have expected that a certain amount of rot repair is figured into a paint job in the same way that a certain amount of decking repair is figured into a roofing job. At any rate, we had certainly discussed rot repair when he came to bid the job. I?ll conclude with a point in Jason?s favor. I had taken bids from two other repair guys. I did not hire them, in part, because they resisted the notion that Masonite and fiber cement boards needed to have their backs and edges painted even where it would not show, to give them proper service life. Jason did understand this, and did see that all sides were painted. He also used a recommended primer for fiber cement products that I had not been aware of.
Different types of siding provide unique aesthetic and structural features, with each material commanding its own cost. Availability of materials and shipping costs also factors largely into the cost.
The common types of siding materials include:
Stucco: $7–$9 per square foot
Wood: $1–$15 per square foot
Engineered wood: $1–$6 per square foot
Aluminum: $3–$6 per square foot
Fiber cement: $5–$14 per square foot
Brick: $10–$20 per square foot
Brick veneer: $3–$10 per square foot
Stone: $7–$30 per square foot
Stone veneer: $5–$11 per square foot
There should be small gaps between your roof and the walls of your home, and other buildings. These small gaps let building materials shift, expand, and contract with weather and other outside forces, and they prevent moisture from wicking down walls from roofing and gutter systems. Without these strategic gaps, your home’s exterior and its finishes can sustain water damage, decay, peel, delaminate, and crack. However, there is a fine line between a smart gap and a problematic gap—all gaps should be small, intentional, and covered or filled in with foam insulation to prevent pests from using them as access points.
Concrete log siding is not the same as fiber cement siding. Fiber cement siding is made from a mixture of cement and cellulose fibers, while GFRC is made from cement, glass fibers, and polymers. The materials are similar in their durability, longevity, and curb appeal, and the main difference is that concrete log siding is available in more styles that resemble traditional log siding. Fiber cement is also less expensive, with materials costing around half what you’d pay for concrete log siding.
To maintain vinyl siding, homeowners should regularly clean it with mild soap and water, inspect for damage, and promptly repair any issues. Avoid using high-pressure washing and keep sharp objects away to prevent scratches. Check for mold or mildew and clean with a mixture of water and mild detergent. Take preventive measures to avoid fading, such as minimizing exposure to direct sunlight and using color-safe cleaning products. With proper maintenance, vinyl siding can retain its appearance for years.
Not always. The answer depends on your specific vinyl siding product. While some manufacturers advise against pressure washing, others recommend pressure washing as long as pressure is kept below a certain threshold.
The Talbotton, GA homeowners’ guide to siding services
From average costs to expert advice, get all the answers you need to get your job done.
Aluminum siding costs between $4,500 and $19,000 on average, depending on the style, square footage, and local labor rates. Keep reading to estimate your budget.
Siding is a critical part of keeping your home protected from the elements and looking great. Learn what siding on a house is, how long it lasts, and what it costs.
Knowing the differences between fiber cement and vinyl siding can help you choose the right one for your home. Our guide explores these two siding choices.
In this guide, we break down the strengths and weaknesses of the two most popular materials for home exteriors to help you choose the best one for your needs.
